Fretting corrosio ASTM D4170 FAFNIR test, mm |
0.8* |
EP performances DIN 51350/4, weld load, N |
>4 000 |
Penetration DIN ISO 2137 100 000 strokes |
+30 max. |
Penetration DIN ISO 2137 60 strokes |
280–310 |
ase oil viscosity 100 °C, mm²/s |
30 |
ase oil viscosity 40 °C, mm²/s |
320 |
Dropping point, DIN ISO 2176 |
>300 °C (>570 °F) |
TLSD series 125 ml refill |
LGFQ 2/SD125 |
TLSD series 250 ml refill |
LGFQ Q/SD250 |
Operating temperature range |
–40 to +140 °C (–40 to +284 °F) |
Copper corrosio DIN 51811 |
1b max. at 100 °C (210 °F) |
Typical applications |
Pellet presses (pet food, sugar, salt); Mixers; Mills; Centralized lubrication systems; |
Features & benefits |
Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false brinelling protection; Good pumpability down to low temperatures; NSF H1 registered |
LAGD series 125 ml |
LAGD 125/FQ2 |
420 ml cartridge |
LGFQ 2/0.4 |
ase oil type |
Synthetic (PAO) |
NSF Reg. No. |
153759 |
Shelf life |
2 years |
180 kg drum |
LGFQ 2/180 |
NLGI grade |
1.5 |
Designatio |
LGFQ 2/(pack size) |
50 kg drum |
LGFQ 2/50 |
18 kg pail |
LGFQ 2/18 |
Pack size |
Designation |
DIN 51825 |
KP1/2N-40 |
Thickene |
Complex calcium sulphonate |
Colou |
Brown |
Oil separatio DIN 51817, 7 days at 40 °C, % |
3 max. |
Water resistance DIN 51807/1, 3 hrs at 90 °C |
1 max. |
Corrosion protectio Emcor: - standard ISO 11007 |
0–0 |
Lubrication ability R2F, running test B at 120 °C |
Pass |
EP performances DIN 51350/5, wear scar, 1 400 N, mm |
1 max. |
Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm |
–20 to +30 max. |
Corrosion protectio Emcor: - salt water test (0.5% NaCl) DIN 51802 |
0–0 |