| TLMR 101 series 120 ml refill (incl. battery) |
LGWA 2/MR120B |
| TLMR 101 series 380 ml refill (incl. battery) |
LGWA 2/MR380B |
| ase oil viscosity 100 °C, mm²/s |
15 |
| ase oil viscosity 40 °C, mm²/s |
185 |
| TLMR 201 series 380 ml refill |
LGWA 2/MR380 |
| Mechanical stability V2F test |
'M' |
| TLMR 201 series 120 ml refill |
LGWA 2/MR120 |
| Operating temperature range |
–30 to +140 °C (–20 to +285 °F) |
| Dropping point DIN ISO 2176 |
>250 °C (>480 °F) |
| Copper corrosio DIN 51 811 |
2 max. at 100 °C (210 °F) |
| TLSD series 250 ml refill |
LGWA 2/SD250 |
| TLSD series 125 ml refill |
LGWA 2/SD125 |
| NLGI consistency class |
2 |
| Typical applications |
Wheel bearings in cars, trailers and trucks; Washing machines; Fan and electric motors; |
| Features & benefits |
Excellent lubrication at peak temperatures up to 220 °C (430 °F) for short periods; Protection of wheel bearings operating under severe conditions; Effective lubrication in wet conditions; Good water |
| TLSD series 250 ml |
TLSD 250/WA2 |
| TLSD series 125 ml |
TLSD 125/WA2 |
| LAGD series 125 ml |
LAGD 125/WA2 |
| 420 ml cartridge |
LGWA 2/0.4 |
| LAGD series 60 ml |
LAGD 60/WA2 |
| DIN 51825 code |
KP2N-30 |
| ase oil type |
Mineral |
| 180 kg drum |
LGWA 2/180 |
| Shelf life |
5 years |
| Designatio |
LGWA 2/(pack size) |
| 50 kg drum |
LGWA 2/50 |
| 200 g tube |
LGWA 2/0.2 |
| 18 kg pail |
LGWA 2/18 |
| Thickene |
Lithium complex |
| Packsize |
Designation |
| 5 kg ca |
LGWA 2/5 |
| 1 kg ca |
LGWA 2/1 |
| Colou |
Amber |
| Water resistance DIN 51 807/1, 3 hrs at 90 °C |
1 max. |
| Penetration DIN ISO 2137 60 strokes, 10–¹ mm |
265–295 |
| Corrosion protectio Emcor: – standard ISO 11007 |
0–0 |
| Corrosion protectio Emcor: – water washout test |
0–0* |
| EP performance Wear scar DIN 51350/5, 1 400 N, mm |
1,6 max. |
| Lubrication ability R2F, running test B at 120 °C |
Pass at 100 °C (210 °F) |
| Penetration DIN ISO 2137 100 000 strokes, 10–¹ mm |
+50 max. (325 max.) |
| Oil separatio DIN 51 817, 7 days at 40 °C, static, % |
1–5 |
| EP performance 4–ball test, welding load DIN 51350/4, N |
2 600 min. |
| Mechanical stability Roll stability, 50 hrs at 80 °C, 10–¹ mm |
+50 max. change |