LAGD125/EM2M.LGEM-2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils

Brand Name:SKF
Model Number:LAGD125/EM2M.LGEM-2
Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340
TLMR 101 series 380 ml refill (incl. battery):LGWM 1/MR 380B
ase oil viscosity 100 °C, mm²/s:16
Fretting corrosio ASTM D4170 (mg):5,5*
ase oil viscosity 40 °C, mm²/s:200
TLMR 201 series 380 ml refill:LGWM 1/MR380
Operating temperature range:–30 to +110 °C (–20 to +230 °F)
Dropping point DIN ISO 2176:>170 °C (>340 °F)

Product Details

Penetration DIN ISO 2137 60 strokes, 10–1 mm310–340
TLMR 101 series 380 ml refill (incl. battery)LGWM 1/MR 380B
ase oil viscosity 100 °C, mm²/s16
Fretting corrosio ASTM D4170 (mg)5,5*
ase oil viscosity 40 °C, mm²/s200
TLMR 201 series 380 ml refillLGWM 1/MR380
Operating temperature range–30 to +110 °C (–20 to +230 °F)
Dropping point DIN ISO 2176>170 °C (>340 °F)
Copper corrosio DIN 51 8112 max. at 90 °C (>195 °F)
NLGI consistency class1
Typical applicationsWind turbine main shafts; Screw conveyors; Centralised lubrication systems; Spherical roller thrust bearing applications;
Features & benefitsGood oil film formation at low temperatures down to –30 °C (–20 °F); Good pumpability down to low temperatures; Good corrosion protection; Good water resistance; Wind turbine main shafts; Screw
420 ml cartridgeLGWM 1/0.4
DIN 51825 codeKP1G-30
ase oil typeMineral
Shelf life5 years
180 kg drumLGWM 1/180
DesignatioLGWM 1/(pack size)
50 kg drumLGWM 1/50
18 kg pailLGWM 1/18
ThickeneLithium
PacksizeDesignation
5 kg caLGWM 1/5
ColouBrown
Water resistance DIN 51 807/1, 3 hrs at 90 °C1 max.
Corrosion protectio Emcor: – standard ISO 110070–0
Corrosion protectio Emcor: – water washout test0–0
EP performance Wear scar DIN 51350/5, 1 400 N, mm1,8 max.
Penetration DIN ISO 2137 100 000 strokes, 10–1 mm+50 max.
Oil separatio DIN 51 817, 7 days at 40 °C, static, %8–13
EP performance 4–ball test, welding load DIN 51350/4, N3 200 min.*
View more

Company Profile

Phone +61-2-9985 9219
View more

Related News

  • The Three Mistakes of Bearing Lubrication - ApplicationsMay 19, 2016 — Too much grease builds pressure, pushing the rolling elements through the fluid film and against the outer race. The bearing now has to work much harder to push the rolling...
  • Can WD40 be Used as a Bearing Lubricant?"I am being asked by others in my company to start using WD40 as a bearing lubricant. I know that this is not best practice, but I need to explain to them why Can You Use WD40 To Clean Skateboard...
  • CV joint grease question - Pelican Parts ForumsDec 19, 2016 — My question is: Can I get any off the shelf CV grease to put in there or do I to for some reason, plain jane wheel bearing grease would be fine Choosing the Right Grease - Machinery...
  • Recommended Products

    All Products Contact Now