Fretting corrosio ASTM D4170 FAFNIR test, mm | 0.8* |
EP performances DIN 51350/4, weld load, N | >4 000 |
Penetration DIN ISO 2137 100 000 strokes | +30 max. |
Penetration DIN ISO 2137 60 strokes | 280–310 |
ase oil viscosity 100 °C, mm²/s | 30 |
ase oil viscosity 40 °C, mm²/s | 320 |
Dropping point, DIN ISO 2176 | >300 °C (>570 °F) |
TLSD series 125 ml refill | LGFQ 2/SD125 |
TLSD series 250 ml refill | LGFQ Q/SD250 |
Operating temperature range | –40 to +140 °C (–40 to +284 °F) |
Copper corrosio DIN 51811 | 1b max. at 100 °C (210 °F) |
Typical applications | Pellet presses (pet food, sugar, salt); Mixers; Mills; Centralized lubrication systems; |
Features & benefits | Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false brinelling protection; Good pumpability down to low temperatures; NSF H1 registered |
LAGD series 125 ml | LAGD 125/FQ2 |
420 ml cartridge | LGFQ 2/0.4 |
ase oil type | Synthetic (PAO) |
NSF Reg. No. | 153759 |
Shelf life | 2 years |
180 kg drum | LGFQ 2/180 |
NLGI grade | 1.5 |
Designatio | LGFQ 2/(pack size) |
50 kg drum | LGFQ 2/50 |
18 kg pail | LGFQ 2/18 |
Pack size | Designation |
DIN 51825 | KP1/2N-40 |
Thickene | Complex calcium sulphonate |
Colou | Brown |
Oil separatio DIN 51817, 7 days at 40 °C, % | 3 max. |
Water resistance DIN 51807/1, 3 hrs at 90 °C | 1 max. |
Corrosion protectio Emcor: - standard ISO 11007 | 0–0 |
Lubrication ability R2F, running test B at 120 °C | Pass |
EP performances DIN 51350/5, wear scar, 1 400 N, mm | 1 max. |
Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm | –20 to +30 max. |
Corrosion protectio Emcor: - salt water test (0.5% NaCl) DIN 51802 | 0–0 |