LAGE125/HHT26 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils

Brand Name:SKF
Model Number:LAGE125/HHT26
Water resistance DIN 51 807/1, 3 hrs at 90 °C:0 max.
Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295
4–ball test, welding load DIN 51350/4, N:2 600 min.
ase oil viscosity 100 °C, mm²/s:13
Dropping point DIN ISO 2176:>170 °C (>340 °F)
Operating temperature range:–40 to +90 °C (–40 to +195°F)
ase oil viscosity 40 °C, mm²/s:110
NLGI consistency class:2

Product Details

Water resistance DIN 51 807/1, 3 hrs at 90 °C0 max.
Penetration DIN ISO 2137 60 strokes, 10–1 mm265–295
4–ball test, welding load DIN 51350/4, N2 600 min.
ase oil viscosity 100 °C, mm²/s13
Dropping point DIN ISO 2176>170 °C (>340 °F)
Operating temperature range–40 to +90 °C (–40 to +195°F)
ase oil viscosity 40 °C, mm²/s110
NLGI consistency class2
Typical applicationsAgricultural and forestry equipment; Construction and earthmoving equipment; Mining and conveying equipment; Water treatment and irrigation; Locks, dams, bridges; Linkages, rod ends;
LAGD series 125 mlLAGD 125/GB2
Features & benefitsGood performance in applications with steel-on-steel spherical plain bearings, ball bearings and roller bearings; Good low temperature start-up performance; Good corrosion inhibiting properties;
420 ml cartridgeLGGB 2/0.4
ase oil typeSynthetic ester
DIN 51825 codeKPE 2K-40
Shelf life2 years
18 kg pailLGGB 2/18
DesignatioLGGB 2/(pack size)
ColouOff white
5 kg caLGGB 2/5
Corrosion protectio Emcor: – standard ISO 110070–0
EP performance Wear scar DIN 51350/5, 1 400 N, mm1,8 max.
Lubrication ability R2F, running test B at 120 °CPass at 100 °C (210 °F)*
Penetration DIN ISO 2137 100 000 strokes, 10–1 mm+50 max. (325 max.)
Oil separatio DIN 51 817, 7 days at 40 °C, static, %0,8–3
Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm+70 max. (350 max.)
Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs>300 at 120 °C (250 °F)
View more

Company Profile

Phone +61-2-9985 9219
View more

Related News

  • The Three Mistakes of Bearing Lubrication - ApplicationsMay 19, 2016 — Too much grease builds pressure, pushing the rolling elements through the fluid film and against the outer race. The bearing now has to work much harder to push the rolling...
  • Can WD40 be Used as a Bearing Lubricant?"I am being asked by others in my company to start using WD40 as a bearing lubricant. I know that this is not best practice, but I need to explain to them why Can You Use WD40 To Clean Skateboard...
  • CV joint grease question - Pelican Parts ForumsDec 19, 2016 — My question is: Can I get any off the shelf CV grease to put in there or do I to for some reason, plain jane wheel bearing grease would be fine Choosing the Right Grease - Machinery...
  • Recommended Products

    All Products Contact Now