TLMR 101 series 120 ml refill (incl. battery) | LGWA 2/MR120B |
TLMR 101 series 380 ml refill (incl. battery) | LGWA 2/MR380B |
ase oil viscosity 100 °C, mm²/s | 15 |
ase oil viscosity 40 °C, mm²/s | 185 |
TLMR 201 series 380 ml refill | LGWA 2/MR380 |
Mechanical stability V2F test | 'M' |
TLMR 201 series 120 ml refill | LGWA 2/MR120 |
Operating temperature range | –30 to +140 °C (–20 to +285 °F) |
Dropping point DIN ISO 2176 | >250 °C (>480 °F) |
Copper corrosio DIN 51 811 | 2 max. at 100 °C (210 °F) |
TLSD series 250 ml refill | LGWA 2/SD250 |
TLSD series 125 ml refill | LGWA 2/SD125 |
NLGI consistency class | 2 |
Typical applications | Wheel bearings in cars, trailers and trucks; Washing machines; Fan and electric motors; |
Features & benefits | Excellent lubrication at peak temperatures up to 220 °C (430 °F) for short periods; Protection of wheel bearings operating under severe conditions; Effective lubrication in wet conditions; Good water |
TLSD series 250 ml | TLSD 250/WA2 |
TLSD series 125 ml | TLSD 125/WA2 |
LAGD series 125 ml | LAGD 125/WA2 |
420 ml cartridge | LGWA 2/0.4 |
LAGD series 60 ml | LAGD 60/WA2 |
DIN 51825 code | KP2N-30 |
ase oil type | Mineral |
180 kg drum | LGWA 2/180 |
Shelf life | 5 years |
Designatio | LGWA 2/(pack size) |
50 kg drum | LGWA 2/50 |
200 g tube | LGWA 2/0.2 |
18 kg pail | LGWA 2/18 |
Thickene | Lithium complex |
Packsize | Designation |
5 kg ca | LGWA 2/5 |
1 kg ca | LGWA 2/1 |
Colou | Amber |
Water resistance DIN 51 807/1, 3 hrs at 90 °C | 1 max. |
Penetration DIN ISO 2137 60 strokes, 10–¹ mm | 265–295 |
Corrosion protectio Emcor: – standard ISO 11007 | 0–0 |
Corrosion protectio Emcor: – water washout test | 0–0* |
EP performance Wear scar DIN 51350/5, 1 400 N, mm | 1,6 max. |
Lubrication ability R2F, running test B at 120 °C | Pass at 100 °C (210 °F) |
Penetration DIN ISO 2137 100 000 strokes, 10–¹ mm | +50 max. (325 max.) |
Oil separatio DIN 51 817, 7 days at 40 °C, static, % | 1–5 |
EP performance 4–ball test, welding load DIN 51350/4, N | 2 600 min. |
Mechanical stability Roll stability, 50 hrs at 80 °C, 10–¹ mm | +50 max. change |