| TLMR 101 series 380 ml refill (incl. battery) |
LGEV2/MR 380B |
| ase oil viscosity 100 °C, mm²/s |
58 |
| ase oil viscosity 40 °C, mm²/s |
1 020 |
| TLMR 201 series 380 ml refill |
LGEV 2/MR380 |
| Mechanical stability V2F test |
‘M’ |
| Operating temperature range |
–10 to +120 °C (15 to 250 °F) |
| Dropping point DIN ISO 2176 |
>180 °C (>355 °F) |
| Copper corrosio DIN 51 811 |
1 max 100 °C (210 °F) |
| NLGI consistency class |
2 |
| Typical applications |
Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators; Slewing ring bearings; High pressure roller mills; Crushers; |
| Features & benefits |
Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a situation where microslip is likely to occur; Extremely mechanically stable |
| 420 ml cartridge |
LGEV 2/0.4 |
| DIN 51825 code |
KPF2K-10 |
| ase oil type |
Mineral |
| 180 kg drum |
LGEV 2/180 |
| Shelf life |
5 years |
| Designatio |
LGEV 2/(pack size) |
| 50 kg drum |
LGEV 2/50 |
| 18 kg pail |
LGEV 2/18 |
| 35 g tube |
LGEV 2/0.035 |
| Thickene |
Lithium/calcium |
| Packsize |
Designation |
| Colou |
Black |
| 5 kg ca |
LGEV 2/5 |
| Penetration DIN ISO 2137 60 strokes, 10–1 mm |
265–295 |
| Water resistance DIN 51 807/1, 3 hrs at 90 °C |
1 max. |
| Corrosion protectio Emcor: – standard ISO 11007 |
0–0 |
| Corrosion protectio Emcor: – water washout test |
0–0* |
| EP performance Wear scar DIN 51350/5, 1 400 N, mm |
1,2 max. |
| Penetration DIN ISO 2137 100 000 strokes, 10–1 mm |
325 max. |
| Oil separatio DIN 51 817, 7 days at 40 °C, static, % |
1–5 |
| EP performance 4–ball test, welding load DIN 51350/4, N |
3 000 min. |
| Corrosion protectio Emcor:– salt water test (100% seawater) |
0–0* |
| Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm |
+50 max. |