You may like Skf Bearing Grease as bellow | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | m | W | D | B | H | t | Z | |
ZR3.20.1250.400-1SPPN | ISB | - | 12 mm | - | 1397 mm | - | 132 mm | - | 87 mm |
ARN65125 | NTN | - | - | - | 125 mm | - | - | - | - |
ZAXFM1255 | INA | 0,05 mm / Axial runout accuracy | 160 g / Weight | 3 mm / Grub screw to DIN 913 | 55 mm / The bearing outer ring is blue anodised | 20 mm | 35 mm | 24 mm | - |
125TAD20 | NACHI | - | - | - | 180 mm | - | - | - | - |
125RIF550 | Timken | - | - | - | 419,1 mm | 50,8 mm | - | - | - |
125RIF551 | Timken | - | - | - | 482,6 mm | 66,67 mm | - | - | - |
125RIJ550 | Timken | - | - | - | 419,1 mm | 50,8 mm | - | - | - |
ZGB 110X125X100 | INA | - | - | - | 125 mm | 100 mm | - | - | - |
ZARN 65125 L TN | NBS | - | - | - | 125 mm | 17,5 mm | - | - | - |
ZARN 65125 TN | NBS | - | - | - | 125 mm | 17,5 mm | 82 mm | - | - |
125RIJ551 | Timken | - | - | - | 482,6 mm | 66,67 mm | - | - | - |
LHFP150/EML25 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | TLMR 101 series 380 ml refill (incl. battery):LGEV2/MR 380B; ase oil viscosity 100 °C, mm²/s:58; ase oil viscosity 40 °C, mm²/s:1 020; TLMR 201 series 380 ml refill:LGEV 2/MR380; Mechanical stability V2F test:‘M’; Operating temperature range:–10 to +120 °C (15 to 250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:1 max 100 °C (210 °F); NLGI consistency class:2; Typical applications:Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators;; Features & benefits:Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a; 420 ml cartridge:LGEV 2/0.4; DIN 51825 code:KPF2K-10; ase oil type:Mineral; 180 kg drum:LGEV 2/180; Shelf life:5 years; Designatio:LGEV 2/(pack size); 50 kg drum:LGEV 2/50; 18 kg pail:LGEV 2/18; 35 g tube:LGEV 2/0.035; Thickene:Lithium/calcium; Packsize:Designation; Colou:Black; 5 kg ca:LGEV 2/5; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0*; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 000 min.; Corrosion protectio Emcor:– salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:+50 max.; |
LGHB2/EML125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | TLMR 101 series 380 ml refill (incl. battery):LGEV2/MR 380B; ase oil viscosity 100 °C, mm²/s:58; ase oil viscosity 40 °C, mm²/s:1 020; TLMR 201 series 380 ml refill:LGEV 2/MR380; Mechanical stability V2F test:‘M’; Operating temperature range:–10 to +120 °C (15 to 250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:1 max 100 °C (210 °F); NLGI consistency class:2; Typical applications:Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators;; Features & benefits:Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a; 420 ml cartridge:LGEV 2/0.4; DIN 51825 code:KPF2K-10; ase oil type:Mineral; 180 kg drum:LGEV 2/180; Shelf life:5 years; Designatio:LGEV 2/(pack size); 50 kg drum:LGEV 2/50; 18 kg pail:LGEV 2/18; 35 g tube:LGEV 2/0.035; Thickene:Lithium/calcium; Packsize:Designation; Colou:Black; 5 kg ca:LGEV 2/5; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0*; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 000 min.; Corrosion protectio Emcor:– salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:+50 max.; |
LAHD1000-1 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs1 000 min. at 100 °– water washout test0–0ThickeneLithium-CalciumEP performance Wear scar DIN 51350/5, 1 400 N, mm1.8 max.Water resistance DIN 51 807/1, 3 hrs at 90 °C1 max.NLGI consistency class1Penetration DIN ISO 2137 60 strokes, |
LGHP2/SD125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | TLMR 101 series 380 ml refill (incl. battery):LGEV2/MR 380B; ase oil viscosity 100 °C, mm²/s:58; ase oil viscosity 40 °C, mm²/s:1 020; TLMR 201 series 380 ml refill:LGEV 2/MR380; Mechanical stability V2F test:‘M’; Operating temperature range:–10 to +120 °C (15 to 250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:1 max 100 °C (210 °F); NLGI consistency class:2; Typical applications:Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators;; Features & benefits:Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a; 420 ml cartridge:LGEV 2/0.4; DIN 51825 code:KPF2K-10; ase oil type:Mineral; 180 kg drum:LGEV 2/180; Shelf life:5 years; Designatio:LGEV 2/(pack size); 50 kg drum:LGEV 2/50; 18 kg pail:LGEV 2/18; 35 g tube:LGEV 2/0.035; Thickene:Lithium/calcium; Packsize:Designation; Colou:Black; 5 kg ca:LGEV 2/5; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0*; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 000 min.; Corrosion protectio Emcor:– salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:+50 max.; |
LAGD125/EM2M.LGEM-2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | TLMR 101 series 380 ml refill (incl. battery):LGEV2/MR 380B; ase oil viscosity 100 °C, mm²/s:58; ase oil viscosity 40 °C, mm²/s:1 020; TLMR 201 series 380 ml refill:LGEV 2/MR380; Mechanical stability V2F test:‘M’; Operating temperature range:–10 to +120 °C (15 to 250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:1 max 100 °C (210 °F); NLGI consistency class:2; Typical applications:Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators;; Features & benefits:Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a; 420 ml cartridge:LGEV 2/0.4; DIN 51825 code:KPF2K-10; ase oil type:Mineral; 180 kg drum:LGEV 2/180; Shelf life:5 years; Designatio:LGEV 2/(pack size); 50 kg drum:LGEV 2/50; 18 kg pail:LGEV 2/18; 35 g tube:LGEV 2/0.035; Thickene:Lithium/calcium; Packsize:Designation; Colou:Black; 5 kg ca:LGEV 2/5; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0*; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 000 min.; Corrosion protectio Emcor:– salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:+50 max.; |
LAGD125/HFP15 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | TLMR 101 series 380 ml refill (incl. battery):LGEV2/MR 380B; ase oil viscosity 100 °C, mm²/s:58; ase oil viscosity 40 °C, mm²/s:1 020; TLMR 201 series 380 ml refill:LGEV 2/MR380; Mechanical stability V2F test:‘M’; Operating temperature range:–10 to +120 °C (15 to 250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:1 max 100 °C (210 °F); NLGI consistency class:2; Typical applications:Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators;; Features & benefits:Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a; 420 ml cartridge:LGEV 2/0.4; DIN 51825 code:KPF2K-10; ase oil type:Mineral; 180 kg drum:LGEV 2/180; Shelf life:5 years; Designatio:LGEV 2/(pack size); 50 kg drum:LGEV 2/50; 18 kg pail:LGEV 2/18; 35 g tube:LGEV 2/0.035; Thickene:Lithium/calcium; Packsize:Designation; Colou:Black; 5 kg ca:LGEV 2/5; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0*; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 000 min.; Corrosion protectio Emcor:– salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:+50 max.; |
LHSP38/0.015 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | TLMR 101 series 380 ml refill (incl. battery):LGEV2/MR 380B; ase oil viscosity 100 °C, mm²/s:58; ase oil viscosity 40 °C, mm²/s:1 020; TLMR 201 series 380 ml refill:LGEV 2/MR380; Mechanical stability V2F test:‘M’; Operating temperature range:–10 to +120 °C (15 to 250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:1 max 100 °C (210 °F); NLGI consistency class:2; Typical applications:Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators;; Features & benefits:Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a; 420 ml cartridge:LGEV 2/0.4; DIN 51825 code:KPF2K-10; ase oil type:Mineral; 180 kg drum:LGEV 2/180; Shelf life:5 years; Designatio:LGEV 2/(pack size); 50 kg drum:LGEV 2/50; 18 kg pail:LGEV 2/18; 35 g tube:LGEV 2/0.035; Thickene:Lithium/calcium; Packsize:Designation; Colou:Black; 5 kg ca:LGEV 2/5; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0*; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 000 min.; Corrosion protectio Emcor:– salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:+50 max.; |
LAGE125/HP2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | TLMR 101 series 380 ml refill (incl. battery):LGEV2/MR 380B; ase oil viscosity 100 °C, mm²/s:58; ase oil viscosity 40 °C, mm²/s:1 020; TLMR 201 series 380 ml refill:LGEV 2/MR380; Mechanical stability V2F test:‘M’; Operating temperature range:–10 to +120 °C (15 to 250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:1 max 100 °C (210 °F); NLGI consistency class:2; Typical applications:Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators;; Features & benefits:Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a; 420 ml cartridge:LGEV 2/0.4; DIN 51825 code:KPF2K-10; ase oil type:Mineral; 180 kg drum:LGEV 2/180; Shelf life:5 years; Designatio:LGEV 2/(pack size); 50 kg drum:LGEV 2/50; 18 kg pail:LGEV 2/18; 35 g tube:LGEV 2/0.035; Thickene:Lithium/calcium; Packsize:Designation; Colou:Black; 5 kg ca:LGEV 2/5; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0*; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 000 min.; Corrosion protectio Emcor:– salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:+50 max.; |
LHHT265/EML12 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | TLMR 101 series 380 ml refill (incl. battery):LGEV2/MR 380B; ase oil viscosity 100 °C, mm²/s:58; ase oil viscosity 40 °C, mm²/s:1 020; TLMR 201 series 380 ml refill:LGEV 2/MR380; Mechanical stability V2F test:‘M’; Operating temperature range:–10 to +120 °C (15 to 250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:1 max 100 °C (210 °F); NLGI consistency class:2; Typical applications:Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators;; Features & benefits:Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a; 420 ml cartridge:LGEV 2/0.4; DIN 51825 code:KPF2K-10; ase oil type:Mineral; 180 kg drum:LGEV 2/180; Shelf life:5 years; Designatio:LGEV 2/(pack size); 50 kg drum:LGEV 2/50; 18 kg pail:LGEV 2/18; 35 g tube:LGEV 2/0.035; Thickene:Lithium/calcium; Packsize:Designation; Colou:Black; 5 kg ca:LGEV 2/5; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0*; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 000 min.; Corrosion protectio Emcor:– salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:+50 max.; |
LGEV2/0.035 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | TLMR 101 series 380 ml refill (incl. battery):LGEV2/MR 380B; ase oil viscosity 100 °C, mm²/s:58; ase oil viscosity 40 °C, mm²/s:1 020; TLMR 201 series 380 ml refill:LGEV 2/MR380; Mechanical stability V2F test:‘M’; Operating temperature range:–10 to +120 °C (15 to 250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:1 max 100 °C (210 °F); NLGI consistency class:2; Typical applications:Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators;; Features & benefits:Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a; 420 ml cartridge:LGEV 2/0.4; DIN 51825 code:KPF2K-10; ase oil type:Mineral; 180 kg drum:LGEV 2/180; Shelf life:5 years; Designatio:LGEV 2/(pack size); 50 kg drum:LGEV 2/50; 18 kg pail:LGEV 2/18; 35 g tube:LGEV 2/0.035; Thickene:Lithium/calcium; Packsize:Designation; Colou:Black; 5 kg ca:LGEV 2/5; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0*; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 000 min.; Corrosion protectio Emcor:– salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:+50 max.; |
LAGD125/FG202 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | TLMR 101 series 380 ml refill (incl. battery):LGEV2/MR 380B; ase oil viscosity 100 °C, mm²/s:58; ase oil viscosity 40 °C, mm²/s:1 020; TLMR 201 series 380 ml refill:LGEV 2/MR380; Mechanical stability V2F test:‘M’; Operating temperature range:–10 to +120 °C (15 to 250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:1 max 100 °C (210 °F); NLGI consistency class:2; Typical applications:Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators;; Features & benefits:Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a; 420 ml cartridge:LGEV 2/0.4; DIN 51825 code:KPF2K-10; ase oil type:Mineral; 180 kg drum:LGEV 2/180; Shelf life:5 years; Designatio:LGEV 2/(pack size); 50 kg drum:LGEV 2/50; 18 kg pail:LGEV 2/18; 35 g tube:LGEV 2/0.035; Thickene:Lithium/calcium; Packsize:Designation; Colou:Black; 5 kg ca:LGEV 2/5; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0*; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 000 min.; Corrosion protectio Emcor:– salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:+50 max.; |
LAGD125/FHF15 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | TLMR 101 series 380 ml refill (incl. battery):LGEV2/MR 380B; ase oil viscosity 100 °C, mm²/s:58; ase oil viscosity 40 °C, mm²/s:1 020; TLMR 201 series 380 ml refill:LGEV 2/MR380; Mechanical stability V2F test:‘M’; Operating temperature range:–10 to +120 °C (15 to 250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:1 max 100 °C (210 °F); NLGI consistency class:2; Typical applications:Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators;; Features & benefits:Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a; 420 ml cartridge:LGEV 2/0.4; DIN 51825 code:KPF2K-10; ase oil type:Mineral; 180 kg drum:LGEV 2/180; Shelf life:5 years; Designatio:LGEV 2/(pack size); 50 kg drum:LGEV 2/50; 18 kg pail:LGEV 2/18; 35 g tube:LGEV 2/0.035; Thickene:Lithium/calcium; Packsize:Designation; Colou:Black; 5 kg ca:LGEV 2/5; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0*; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 000 min.; Corrosion protectio Emcor:– salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:+50 max.; |
TLSD250/HB2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | TLMR 101 series 380 ml refill (incl. battery):LGEV2/MR 380B; ase oil viscosity 100 °C, mm²/s:58; ase oil viscosity 40 °C, mm²/s:1 020; TLMR 201 series 380 ml refill:LGEV 2/MR380; Mechanical stability V2F test:‘M’; Operating temperature range:–10 to +120 °C (15 to 250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:1 max 100 °C (210 °F); NLGI consistency class:2; Typical applications:Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators;; Features & benefits:Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a; 420 ml cartridge:LGEV 2/0.4; DIN 51825 code:KPF2K-10; ase oil type:Mineral; 180 kg drum:LGEV 2/180; Shelf life:5 years; Designatio:LGEV 2/(pack size); 50 kg drum:LGEV 2/50; 18 kg pail:LGEV 2/18; 35 g tube:LGEV 2/0.035; Thickene:Lithium/calcium; Packsize:Designation; Colou:Black; 5 kg ca:LGEV 2/5; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0*; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 000 min.; Corrosion protectio Emcor:– salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:+50 max.; |
LAGE125/HHT26 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | TLMR 101 series 380 ml refill (incl. battery):LGEV2/MR 380B; ase oil viscosity 100 °C, mm²/s:58; ase oil viscosity 40 °C, mm²/s:1 020; TLMR 201 series 380 ml refill:LGEV 2/MR380; Mechanical stability V2F test:‘M’; Operating temperature range:–10 to +120 °C (15 to 250 °F); Dropping point DIN ISO 2176:>180 °C (>355 °F); Copper corrosio DIN 51 811:1 max 100 °C (210 °F); NLGI consistency class:2; Typical applications:Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators;; Features & benefits:Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a; 420 ml cartridge:LGEV 2/0.4; DIN 51825 code:KPF2K-10; ase oil type:Mineral; 180 kg drum:LGEV 2/180; Shelf life:5 years; Designatio:LGEV 2/(pack size); 50 kg drum:LGEV 2/50; 18 kg pail:LGEV 2/18; 35 g tube:LGEV 2/0.035; Thickene:Lithium/calcium; Packsize:Designation; Colou:Black; 5 kg ca:LGEV 2/5; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; Corrosion protectio Emcor: – standard ISO 11007:0–0; Corrosion protectio Emcor: – water washout test:0–0*; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,2 max.; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:325 max.; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; EP performance 4–ball test, welding load DIN 51350/4, N:3 000 min.; Corrosion protectio Emcor:– salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:+50 max.; |
LAGD125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils Video