| ase oil viscosity 40 °C, mm²/s |
500 |
| ase oil viscosity 100 °C, mm²/s |
32 |
| Penetration DIN ISO 2137 60 strokes, 10–1 mm |
265–295 |
| Mechanical stability V2F test |
‘M’ |
| Operating temperature range |
–20 to +120 °C (–5 to +250 °F) |
| Dropping point DIN ISO 2176 |
>180 °C (>355 °F) |
| Copper corrosio DIN 51 811 |
2 max. at 100 °C (210 °F) |
| TLSD series 250 ml refill |
LGEM 2/SD250 |
| TLSD series 125 ml refill |
LGEM 2/SD125 |
| NLGI consistency class |
2 |
| Typical applications |
Rolling element bearings running at low speed and very high loads; Jaw crushers; Track laying machines; Lift mast wheels; Building machines such as mechanical rams, crane arms and crane hooks; |
| LAGD series 125 ml |
LAGD 125/EM2 |
| TLSD series 125 ml |
TLSD 125/EM2 |
| TLSD series 250 ml |
TLSD 250/EM2 |
| Features & benefits |
High oxidation stability; Molybdenum disulphide and graphite provide lubrication even if the oil film breaks down; Rolling element bearings running at low speed and very high loads; Jaw crushers; |
| LAGD series 60 ml |
LAGD 60/EM2 |
| 420 ml cartridge |
LGEM 2/0.4 |
| DIN 51825 code |
KPF2K-20 |
| ase oil type |
Mineral |
| 180 kg drum |
LGEM 2/180 |
| Shelf life |
5 years |
| Designatio |
LGEM 2/(pack size) |
| 18 kg pail |
LGEM 2/18 |
| Thickene |
Lithium/calcium |
| Packsize |
Designation |
| 5 kg ca |
LGEM 2/5 |
| Colou |
Black |
| Water resistance DIN 51 807/1, 3 hrs at 90 °C |
1 max. |
| Corrosion protectio Emcor: – standard ISO 11007 |
0–0 |
| Corrosion protectio Emcor: – water washout test |
0–0 * |
| EP performance Wear scar DIN 51350/5, 1 400 N, mm |
1,2 max. |
| Lubrication ability R2F, running test B at 120 °C |
Pass at 100 °C (210 °F) |
| Penetration DIN ISO 2137 100 000 strokes, 10–1 mm |
325 max. |
| Oil separatio DIN 51 817, 7 days at 40 °C, static, % |
1–5 |
| EP performance 4–ball test, welding load DIN 51350/4, N |
3 400 min. |
| Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm |
345 max. |