| Lubrication ability R2F, running test B at 120 °C |
Pass at 140 °C (285 °F) |
| EP performance Wear scar DIN 51350/5, 1 400 N, mm |
1,5 max. * |
| Corrosion protectio Emcor: – water washout test |
0–0 |
| Corrosion protectio Emcor: – standard ISO 11007 |
0–0 |
| Water resistance DIN 51 807/1, 3 hrs at 90 °C |
1 max. |
| ase oil viscosity 100 °C, mm²/s |
8,6 |
| TLMR 101 series 380 ml refill (incl. battery) |
LGWM 2/MR 380B |
| Penetration DIN ISO 2137 60 strokes, 10–1 mm |
280–310 |
| ase oil viscosity 40 °C, mm²/s |
80 |
| TLMR 201 series 380 ml refill |
LGWM 2/MR380 |
| Operating temperature range |
–40 to +110 °C (–40 to +230 °F) |
| Dropping point DIN ISO 2176 |
>300 °C (>570 °F) |
| Copper corrosio DIN 51 811 |
2 max. at 100 °C (210 °F) |
| NLGI consistency class |
1–2 |
| Typical applications |
Wind turbine mains shafts; Heavy duty off road applications; Snow exposed applications; Marine and offshore applications; Spherical roller thrust bearing applications; |
| Features & benefits |
Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false brinelling protection; Good pumpability down to low temperatures; Wind turbine |
| LAGD series 125 ml |
LAGD 125/WM2 |
| 420 ml cartridge |
LGWM 2/0.4 |
| DIN 51825 code |
KP2G-40 |
| ase oil type |
Synthetic (PAO)/ Mineral |
| 180 kg drum |
LGWM 2/180 |
| Shelf life |
5 years |
| Designatio |
LGWM 2/(pack size) |
| 50 kg drum |
LGWM 2/50 |
| 18 kg pail |
LGWM 2/18 |
| Thickene |
Calcium sulphonate complex |
| Packsize |
Designation |
| 5 kg ca |
LGWM 2/5 |
| Colou |
Yellow |
| Penetration DIN ISO 2137 100 000 strokes, 10–1 mm |
+30 max |
| Oil separatio DIN 51 817, 7 days at 40 °C, static, % |
3 max. |
| Fretting corrosio ASTM D4170 FAFNIR test at +25 °C, mg |
5,2* |
| EP performance 4–ball test, welding load DIN 51350/4, N |
4 000 min * |
| Fretting corrosio ASTM D4170 FAFNIR test at –20 °C, mg |
1,1* |
| Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm |
+50 max. |
| Corrosion protectio Emcor: – salt water test (100% seawater) |
0–0 * |
| Lubrication ability R2F, Cold chamber test (+20 °C to –30 °C) |
Pass |
| Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs |
1 824* at 110 °C |