| LAGE125/HP2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,5 max. *; Corrosion protectio Emcor: – water washout test:0–0; Corrosion protectio Emcor: – standard ISO 11007:0–0; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:8,6; TLMR 101 series 380 ml refill (incl. battery):LGWM 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:280–310; ase oil viscosity 40 °C, mm²/s:80; TLMR 201 series 380 ml refill:LGWM 2/MR380; Operating temperature range:–40 to +110 °C (–40 to +230 °F); Dropping point DIN ISO 2176:>300 °C (>570 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); NLGI consistency class:1–2; Typical applications:Wind turbine mains shafts; Heavy duty off road applications; Snow exposed applications; Marine and offshore; Features & benefits:Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false; LAGD series 125 ml:LAGD 125/WM2; 420 ml cartridge:LGWM 2/0.4; DIN 51825 code:KP2G-40; ase oil type:Synthetic (PAO)/ Mineral; 180 kg drum:LGWM 2/180; Shelf life:5 years; Designatio:LGWM 2/(pack size); 50 kg drum:LGWM 2/50; 18 kg pail:LGWM 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; 5 kg ca:LGWM 2/5; Colou:Yellow; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:+30 max; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:3 max.; Fretting corrosio ASTM D4170 FAFNIR test at +25 °C, mg:5,2*; EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min *; Fretting corrosio ASTM D4170 FAFNIR test at –20 °C, mg:1,1*; Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm:+50 max.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0 *; Lubrication ability R2F, Cold chamber test (+20 °C to –30 °C):Pass; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 824* at 110 °C; |
| LAGD125/FG202 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,5 max. *; Corrosion protectio Emcor: – water washout test:0–0; Corrosion protectio Emcor: – standard ISO 11007:0–0; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:8,6; TLMR 101 series 380 ml refill (incl. battery):LGWM 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:280–310; ase oil viscosity 40 °C, mm²/s:80; TLMR 201 series 380 ml refill:LGWM 2/MR380; Operating temperature range:–40 to +110 °C (–40 to +230 °F); Dropping point DIN ISO 2176:>300 °C (>570 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); NLGI consistency class:1–2; Typical applications:Wind turbine mains shafts; Heavy duty off road applications; Snow exposed applications; Marine and offshore; Features & benefits:Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false; LAGD series 125 ml:LAGD 125/WM2; 420 ml cartridge:LGWM 2/0.4; DIN 51825 code:KP2G-40; ase oil type:Synthetic (PAO)/ Mineral; 180 kg drum:LGWM 2/180; Shelf life:5 years; Designatio:LGWM 2/(pack size); 50 kg drum:LGWM 2/50; 18 kg pail:LGWM 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; 5 kg ca:LGWM 2/5; Colou:Yellow; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:+30 max; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:3 max.; Fretting corrosio ASTM D4170 FAFNIR test at +25 °C, mg:5,2*; EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min *; Fretting corrosio ASTM D4170 FAFNIR test at –20 °C, mg:1,1*; Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm:+50 max.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0 *; Lubrication ability R2F, Cold chamber test (+20 °C to –30 °C):Pass; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 824* at 110 °C; |
| LAGE125/HHT26 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,5 max. *; Corrosion protectio Emcor: – water washout test:0–0; Corrosion protectio Emcor: – standard ISO 11007:0–0; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:8,6; TLMR 101 series 380 ml refill (incl. battery):LGWM 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:280–310; ase oil viscosity 40 °C, mm²/s:80; TLMR 201 series 380 ml refill:LGWM 2/MR380; Operating temperature range:–40 to +110 °C (–40 to +230 °F); Dropping point DIN ISO 2176:>300 °C (>570 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); NLGI consistency class:1–2; Typical applications:Wind turbine mains shafts; Heavy duty off road applications; Snow exposed applications; Marine and offshore; Features & benefits:Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false; LAGD series 125 ml:LAGD 125/WM2; 420 ml cartridge:LGWM 2/0.4; DIN 51825 code:KP2G-40; ase oil type:Synthetic (PAO)/ Mineral; 180 kg drum:LGWM 2/180; Shelf life:5 years; Designatio:LGWM 2/(pack size); 50 kg drum:LGWM 2/50; 18 kg pail:LGWM 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; 5 kg ca:LGWM 2/5; Colou:Yellow; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:+30 max; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:3 max.; Fretting corrosio ASTM D4170 FAFNIR test at +25 °C, mg:5,2*; EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min *; Fretting corrosio ASTM D4170 FAFNIR test at –20 °C, mg:1,1*; Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm:+50 max.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0 *; Lubrication ability R2F, Cold chamber test (+20 °C to –30 °C):Pass; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 824* at 110 °C; |
| LGEV2/0.035 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,5 max. *; Corrosion protectio Emcor: – water washout test:0–0; Corrosion protectio Emcor: – standard ISO 11007:0–0; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:8,6; TLMR 101 series 380 ml refill (incl. battery):LGWM 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:280–310; ase oil viscosity 40 °C, mm²/s:80; TLMR 201 series 380 ml refill:LGWM 2/MR380; Operating temperature range:–40 to +110 °C (–40 to +230 °F); Dropping point DIN ISO 2176:>300 °C (>570 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); NLGI consistency class:1–2; Typical applications:Wind turbine mains shafts; Heavy duty off road applications; Snow exposed applications; Marine and offshore; Features & benefits:Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false; LAGD series 125 ml:LAGD 125/WM2; 420 ml cartridge:LGWM 2/0.4; DIN 51825 code:KP2G-40; ase oil type:Synthetic (PAO)/ Mineral; 180 kg drum:LGWM 2/180; Shelf life:5 years; Designatio:LGWM 2/(pack size); 50 kg drum:LGWM 2/50; 18 kg pail:LGWM 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; 5 kg ca:LGWM 2/5; Colou:Yellow; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:+30 max; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:3 max.; Fretting corrosio ASTM D4170 FAFNIR test at +25 °C, mg:5,2*; EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min *; Fretting corrosio ASTM D4170 FAFNIR test at –20 °C, mg:1,1*; Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm:+50 max.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0 *; Lubrication ability R2F, Cold chamber test (+20 °C to –30 °C):Pass; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 824* at 110 °C; |
| LGHB2/EML125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,5 max. *; Corrosion protectio Emcor: – water washout test:0–0; Corrosion protectio Emcor: – standard ISO 11007:0–0; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:8,6; TLMR 101 series 380 ml refill (incl. battery):LGWM 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:280–310; ase oil viscosity 40 °C, mm²/s:80; TLMR 201 series 380 ml refill:LGWM 2/MR380; Operating temperature range:–40 to +110 °C (–40 to +230 °F); Dropping point DIN ISO 2176:>300 °C (>570 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); NLGI consistency class:1–2; Typical applications:Wind turbine mains shafts; Heavy duty off road applications; Snow exposed applications; Marine and offshore; Features & benefits:Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false; LAGD series 125 ml:LAGD 125/WM2; 420 ml cartridge:LGWM 2/0.4; DIN 51825 code:KP2G-40; ase oil type:Synthetic (PAO)/ Mineral; 180 kg drum:LGWM 2/180; Shelf life:5 years; Designatio:LGWM 2/(pack size); 50 kg drum:LGWM 2/50; 18 kg pail:LGWM 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; 5 kg ca:LGWM 2/5; Colou:Yellow; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:+30 max; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:3 max.; Fretting corrosio ASTM D4170 FAFNIR test at +25 °C, mg:5,2*; EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min *; Fretting corrosio ASTM D4170 FAFNIR test at –20 °C, mg:1,1*; Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm:+50 max.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0 *; Lubrication ability R2F, Cold chamber test (+20 °C to –30 °C):Pass; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 824* at 110 °C; |
| LAGD125/HFP15 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,5 max. *; Corrosion protectio Emcor: – water washout test:0–0; Corrosion protectio Emcor: – standard ISO 11007:0–0; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:8,6; TLMR 101 series 380 ml refill (incl. battery):LGWM 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:280–310; ase oil viscosity 40 °C, mm²/s:80; TLMR 201 series 380 ml refill:LGWM 2/MR380; Operating temperature range:–40 to +110 °C (–40 to +230 °F); Dropping point DIN ISO 2176:>300 °C (>570 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); NLGI consistency class:1–2; Typical applications:Wind turbine mains shafts; Heavy duty off road applications; Snow exposed applications; Marine and offshore; Features & benefits:Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false; LAGD series 125 ml:LAGD 125/WM2; 420 ml cartridge:LGWM 2/0.4; DIN 51825 code:KP2G-40; ase oil type:Synthetic (PAO)/ Mineral; 180 kg drum:LGWM 2/180; Shelf life:5 years; Designatio:LGWM 2/(pack size); 50 kg drum:LGWM 2/50; 18 kg pail:LGWM 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; 5 kg ca:LGWM 2/5; Colou:Yellow; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:+30 max; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:3 max.; Fretting corrosio ASTM D4170 FAFNIR test at +25 °C, mg:5,2*; EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min *; Fretting corrosio ASTM D4170 FAFNIR test at –20 °C, mg:1,1*; Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm:+50 max.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0 *; Lubrication ability R2F, Cold chamber test (+20 °C to –30 °C):Pass; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 824* at 110 °C; |
| LAGD125/FHF15 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,5 max. *; Corrosion protectio Emcor: – water washout test:0–0; Corrosion protectio Emcor: – standard ISO 11007:0–0; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:8,6; TLMR 101 series 380 ml refill (incl. battery):LGWM 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:280–310; ase oil viscosity 40 °C, mm²/s:80; TLMR 201 series 380 ml refill:LGWM 2/MR380; Operating temperature range:–40 to +110 °C (–40 to +230 °F); Dropping point DIN ISO 2176:>300 °C (>570 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); NLGI consistency class:1–2; Typical applications:Wind turbine mains shafts; Heavy duty off road applications; Snow exposed applications; Marine and offshore; Features & benefits:Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false; LAGD series 125 ml:LAGD 125/WM2; 420 ml cartridge:LGWM 2/0.4; DIN 51825 code:KP2G-40; ase oil type:Synthetic (PAO)/ Mineral; 180 kg drum:LGWM 2/180; Shelf life:5 years; Designatio:LGWM 2/(pack size); 50 kg drum:LGWM 2/50; 18 kg pail:LGWM 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; 5 kg ca:LGWM 2/5; Colou:Yellow; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:+30 max; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:3 max.; Fretting corrosio ASTM D4170 FAFNIR test at +25 °C, mg:5,2*; EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min *; Fretting corrosio ASTM D4170 FAFNIR test at –20 °C, mg:1,1*; Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm:+50 max.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0 *; Lubrication ability R2F, Cold chamber test (+20 °C to –30 °C):Pass; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 824* at 110 °C; |
| LAHD1000-1 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs1 000 min. at 100 °– water washout test0–0ThickeneLithium-CalciumEP performance Wear scar DIN 51350/5, 1 400 N, mm1.8 max.Water resistance DIN 51 807/1, 3 hrs at 90 °C1 max.NLGI consistency class1Penetration DIN ISO 2137 60 strokes, |
| LHSP38/0.015 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,5 max. *; Corrosion protectio Emcor: – water washout test:0–0; Corrosion protectio Emcor: – standard ISO 11007:0–0; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:8,6; TLMR 101 series 380 ml refill (incl. battery):LGWM 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:280–310; ase oil viscosity 40 °C, mm²/s:80; TLMR 201 series 380 ml refill:LGWM 2/MR380; Operating temperature range:–40 to +110 °C (–40 to +230 °F); Dropping point DIN ISO 2176:>300 °C (>570 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); NLGI consistency class:1–2; Typical applications:Wind turbine mains shafts; Heavy duty off road applications; Snow exposed applications; Marine and offshore; Features & benefits:Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false; LAGD series 125 ml:LAGD 125/WM2; 420 ml cartridge:LGWM 2/0.4; DIN 51825 code:KP2G-40; ase oil type:Synthetic (PAO)/ Mineral; 180 kg drum:LGWM 2/180; Shelf life:5 years; Designatio:LGWM 2/(pack size); 50 kg drum:LGWM 2/50; 18 kg pail:LGWM 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; 5 kg ca:LGWM 2/5; Colou:Yellow; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:+30 max; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:3 max.; Fretting corrosio ASTM D4170 FAFNIR test at +25 °C, mg:5,2*; EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min *; Fretting corrosio ASTM D4170 FAFNIR test at –20 °C, mg:1,1*; Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm:+50 max.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0 *; Lubrication ability R2F, Cold chamber test (+20 °C to –30 °C):Pass; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 824* at 110 °C; |
| LGHP2/SD125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,5 max. *; Corrosion protectio Emcor: – water washout test:0–0; Corrosion protectio Emcor: – standard ISO 11007:0–0; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:8,6; TLMR 101 series 380 ml refill (incl. battery):LGWM 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:280–310; ase oil viscosity 40 °C, mm²/s:80; TLMR 201 series 380 ml refill:LGWM 2/MR380; Operating temperature range:–40 to +110 °C (–40 to +230 °F); Dropping point DIN ISO 2176:>300 °C (>570 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); NLGI consistency class:1–2; Typical applications:Wind turbine mains shafts; Heavy duty off road applications; Snow exposed applications; Marine and offshore; Features & benefits:Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false; LAGD series 125 ml:LAGD 125/WM2; 420 ml cartridge:LGWM 2/0.4; DIN 51825 code:KP2G-40; ase oil type:Synthetic (PAO)/ Mineral; 180 kg drum:LGWM 2/180; Shelf life:5 years; Designatio:LGWM 2/(pack size); 50 kg drum:LGWM 2/50; 18 kg pail:LGWM 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; 5 kg ca:LGWM 2/5; Colou:Yellow; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:+30 max; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:3 max.; Fretting corrosio ASTM D4170 FAFNIR test at +25 °C, mg:5,2*; EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min *; Fretting corrosio ASTM D4170 FAFNIR test at –20 °C, mg:1,1*; Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm:+50 max.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0 *; Lubrication ability R2F, Cold chamber test (+20 °C to –30 °C):Pass; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 824* at 110 °C; |
| LHFP150/EML25 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,5 max. *; Corrosion protectio Emcor: – water washout test:0–0; Corrosion protectio Emcor: – standard ISO 11007:0–0; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:8,6; TLMR 101 series 380 ml refill (incl. battery):LGWM 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:280–310; ase oil viscosity 40 °C, mm²/s:80; TLMR 201 series 380 ml refill:LGWM 2/MR380; Operating temperature range:–40 to +110 °C (–40 to +230 °F); Dropping point DIN ISO 2176:>300 °C (>570 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); NLGI consistency class:1–2; Typical applications:Wind turbine mains shafts; Heavy duty off road applications; Snow exposed applications; Marine and offshore; Features & benefits:Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false; LAGD series 125 ml:LAGD 125/WM2; 420 ml cartridge:LGWM 2/0.4; DIN 51825 code:KP2G-40; ase oil type:Synthetic (PAO)/ Mineral; 180 kg drum:LGWM 2/180; Shelf life:5 years; Designatio:LGWM 2/(pack size); 50 kg drum:LGWM 2/50; 18 kg pail:LGWM 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; 5 kg ca:LGWM 2/5; Colou:Yellow; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:+30 max; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:3 max.; Fretting corrosio ASTM D4170 FAFNIR test at +25 °C, mg:5,2*; EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min *; Fretting corrosio ASTM D4170 FAFNIR test at –20 °C, mg:1,1*; Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm:+50 max.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0 *; Lubrication ability R2F, Cold chamber test (+20 °C to –30 °C):Pass; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 824* at 110 °C; |
| TLSD250/HB2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,5 max. *; Corrosion protectio Emcor: – water washout test:0–0; Corrosion protectio Emcor: – standard ISO 11007:0–0; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:8,6; TLMR 101 series 380 ml refill (incl. battery):LGWM 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:280–310; ase oil viscosity 40 °C, mm²/s:80; TLMR 201 series 380 ml refill:LGWM 2/MR380; Operating temperature range:–40 to +110 °C (–40 to +230 °F); Dropping point DIN ISO 2176:>300 °C (>570 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); NLGI consistency class:1–2; Typical applications:Wind turbine mains shafts; Heavy duty off road applications; Snow exposed applications; Marine and offshore; Features & benefits:Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false; LAGD series 125 ml:LAGD 125/WM2; 420 ml cartridge:LGWM 2/0.4; DIN 51825 code:KP2G-40; ase oil type:Synthetic (PAO)/ Mineral; 180 kg drum:LGWM 2/180; Shelf life:5 years; Designatio:LGWM 2/(pack size); 50 kg drum:LGWM 2/50; 18 kg pail:LGWM 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; 5 kg ca:LGWM 2/5; Colou:Yellow; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:+30 max; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:3 max.; Fretting corrosio ASTM D4170 FAFNIR test at +25 °C, mg:5,2*; EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min *; Fretting corrosio ASTM D4170 FAFNIR test at –20 °C, mg:1,1*; Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm:+50 max.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0 *; Lubrication ability R2F, Cold chamber test (+20 °C to –30 °C):Pass; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 824* at 110 °C; |
| LAGD125/EM2M.LGEM-2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); EP performance Wear scar DIN 51350/5, 1 400 N, mm:1,5 max. *; Corrosion protectio Emcor: – water washout test:0–0; Corrosion protectio Emcor: – standard ISO 11007:0–0; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:8,6; TLMR 101 series 380 ml refill (incl. battery):LGWM 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:280–310; ase oil viscosity 40 °C, mm²/s:80; TLMR 201 series 380 ml refill:LGWM 2/MR380; Operating temperature range:–40 to +110 °C (–40 to +230 °F); Dropping point DIN ISO 2176:>300 °C (>570 °F); Copper corrosio DIN 51 811:2 max. at 100 °C (210 °F); NLGI consistency class:1–2; Typical applications:Wind turbine mains shafts; Heavy duty off road applications; Snow exposed applications; Marine and offshore; Features & benefits:Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false; LAGD series 125 ml:LAGD 125/WM2; 420 ml cartridge:LGWM 2/0.4; DIN 51825 code:KP2G-40; ase oil type:Synthetic (PAO)/ Mineral; 180 kg drum:LGWM 2/180; Shelf life:5 years; Designatio:LGWM 2/(pack size); 50 kg drum:LGWM 2/50; 18 kg pail:LGWM 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; 5 kg ca:LGWM 2/5; Colou:Yellow; Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:+30 max; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:3 max.; Fretting corrosio ASTM D4170 FAFNIR test at +25 °C, mg:5,2*; EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min *; Fretting corrosio ASTM D4170 FAFNIR test at –20 °C, mg:1,1*; Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm:+50 max.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0 *; Lubrication ability R2F, Cold chamber test (+20 °C to –30 °C):Pass; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 824* at 110 °C; |