LAGD125/FP2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils
Brand Name:SKF
Model Number:LAGD125/FP2
Copper corrosio DIN 51 811, 120 °C:1 max.
ase oil viscosity 40 °C, mm2/s:400
– salt water test (1% NaCl):0–0
Operating temperature range:–20 to +120 °C (–4 to +248 °F)
Emco – standard ISO 11007:0–0
Dropping point DIN ISO 2176:170 °C min. (338 °F min)
100 000 strokes, 10–1 mm:+50 max.
– water washout test:0–0

Product Details

Copper corrosio DIN 51 811, 120 °C1 max.
ase oil viscosity 40 °C, mm2/s400
– salt water test (1% NaCl)0–0
Operating temperature range–20 to +120 °C (–4 to +248 °F)
Emco – standard ISO 110070–0
Dropping point DIN ISO 2176170 °C min. (338 °F min)
100 000 strokes, 10–1 mm+50 max.
– water washout test0–0
NLGI consistency class1
Typical applicationsWind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication systems;
Features & benefitsExcellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature; Good flow properties that enable easy replenishment within the bearing design;
DIN 51825 codeKP1K-20
100 °C, mm2/s25
ase oil typeMineral
DesignatioLGEP 1/(pack size)
18 kg pailLGEP 1/18
ThickeneLithium-Calcium
ColouBeige
PacksizeDesignation
4-ball test, welding load DIN 51350/4. N3400 min.
Penetration DIN ISO 2137 60 strokes, 10–1 mm310–340
Water resistance DIN 51 807/1, 3 hrs at 90 °C1 max.
EP performance Wear scar DIN 51350/5, 1 400 N, mm1.8 max.
Lubrication ability R2F, running test B at 120 °CPass at 80 °C
Oil separatio DIN 51 817, 7 days at 40 °C, static, %1–5
Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm+50 max.
Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs1 000 min. at 100 °C
View more

Company Profile

TRAB BEARINGS PRODUCTION EXPORT CO., LTD
Phone +61-2-9985 9219
View more

Related News

  • Can you over grease wheel bearings?
    The Three Mistakes of Bearing Lubrication - ApplicationsMay 19, 2016 — Too much grease builds pressure, pushing the rolling elements through the fluid film and against the outer race. The bearing now has to work much harder to push the rolling...
  • Can you use wd40 to lubricate bearings?
    Can WD40 be Used as a Bearing Lubricant?"I am being asked by others in my company to start using WD40 as a bearing lubricant. I know that this is not best practice, but I need to explain to them why Can You Use WD40 To Clean Skateboard...
  • Can you use wheel bearing grease in a CV joint?
    CV joint grease question - Pelican Parts ForumsDec 19, 2016 — My question is: Can I get any off the shelf CV grease to put in there or do I to for some reason, plain jane wheel bearing grease would be fine Choosing the Right Grease - Machinery...

    • Recommended Products

    All Products Contact Now
    Contact Us