You may like Skf Bearing Grease as bellow | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | m | W | D | B | H | t | Z | |
ZR3.20.1250.400-1SPPN | ISB | - | 12 mm | - | 1397 mm | - | 132 mm | - | 87 mm |
ARN65125 | NTN | - | - | - | 125 mm | - | - | - | - |
ZAXFM1255 | INA | 0,05 mm / Axial runout accuracy | 160 g / Weight | 3 mm / Grub screw to DIN 913 | 55 mm / The bearing outer ring is blue anodised | 20 mm | 35 mm | 24 mm | - |
125TAD20 | NACHI | - | - | - | 180 mm | - | - | - | - |
125RIF550 | Timken | - | - | - | 419,1 mm | 50,8 mm | - | - | - |
125RIF551 | Timken | - | - | - | 482,6 mm | 66,67 mm | - | - | - |
125RIJ550 | Timken | - | - | - | 419,1 mm | 50,8 mm | - | - | - |
ZGB 110X125X100 | INA | - | - | - | 125 mm | 100 mm | - | - | - |
ZARN 65125 L TN | NBS | - | - | - | 125 mm | 17,5 mm | - | - | - |
ZARN 65125 TN | NBS | - | - | - | 125 mm | 17,5 mm | 82 mm | - | - |
125RIJ551 | Timken | - | - | - | 482,6 mm | 66,67 mm | - | - | - |
LAGD125/EM2M.LGEM-2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LAGE125/HP2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LGEV2/0.035 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LAGE125/HHT26 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LHFP150/EML25 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LHSP38/0.015 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LAGD125/FHF15 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LGHB2/EML125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LHHT265/EML12 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LGHP2/SD125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LAGD125/HFP15 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
TLSD250/HB2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LAGD125/FG202 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Copper corrosio DIN 51 811, 120 °C:1 max.; ase oil viscosity 40 °C, mm2/s:400; – salt water test (1% NaCl):0–0; Operating temperature range:–20 to +120 °C (–4 to +248 °F); Emco – standard ISO 11007:0–0; Dropping point DIN ISO 2176:170 °C min. (338 °F min); 100 000 strokes, 10–1 mm:+50 max.; – water washout test:0–0; NLGI consistency class:1; Typical applications:Wind turbine main shaft bearings; Large bearing applications; Heavy industrial applications; Centralized lubrication; Features & benefits:Excellent mechanical stability; Very good protection against fretting and wear; Good flow at low starting temperature;; DIN 51825 code:KP1K-20; 100 °C, mm2/s:25; ase oil type:Mineral; Designatio:LGEP 1/(pack size); 18 kg pail:LGEP 1/18; Thickene:Lithium-Calcium; Colou:Beige; Packsize:Designation; 4-ball test, welding load DIN 51350/4. N:3400 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:310–340; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:1.8 max.; Lubrication ability R2F, running test B at 120 °C:Pass at 80 °C; Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–5; Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm:+50 max.; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:1 000 min. at 100 °C; |
LAHD1000-1 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs1 000 min. at 100 °– water washout test0–0ThickeneLithium-CalciumEP performance Wear scar DIN 51350/5, 1 400 N, mm1.8 max.Water resistance DIN 51 807/1, 3 hrs at 90 °C1 max.NLGI consistency class1Penetration DIN ISO 2137 60 strokes, |
LAGD125/FP2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils Video