TLMR 101 series 380 ml refill (incl. battery) | LGEV2/MR 380B |
ase oil viscosity 100 °C, mm²/s | 58 |
ase oil viscosity 40 °C, mm²/s | 1 020 |
TLMR 201 series 380 ml refill | LGEV 2/MR380 |
Mechanical stability V2F test | ‘M’ |
Operating temperature range | –10 to +120 °C (15 to 250 °F) |
Dropping point DIN ISO 2176 | >180 °C (>355 °F) |
Copper corrosio DIN 51 811 | 1 max 100 °C (210 °F) |
NLGI consistency class | 2 |
Typical applications | Trunnion bearings on rotating drums; Support and thrust rollers on rotary kilns and dryers; Bucket wheel excavators; Slewing ring bearings; High pressure roller mills; Crushers; |
Features & benefits | Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a situation where microslip is likely to occur; Extremely mechanically stable |
420 ml cartridge | LGEV 2/0.4 |
DIN 51825 code | KPF2K-10 |
ase oil type | Mineral |
180 kg drum | LGEV 2/180 |
Shelf life | 5 years |
Designatio | LGEV 2/(pack size) |
50 kg drum | LGEV 2/50 |
18 kg pail | LGEV 2/18 |
35 g tube | LGEV 2/0.035 |
Thickene | Lithium/calcium |
Packsize | Designation |
Colou | Black |
5 kg ca | LGEV 2/5 |
Penetration DIN ISO 2137 60 strokes, 10–1 mm | 265–295 |
Water resistance DIN 51 807/1, 3 hrs at 90 °C | 1 max. |
Corrosion protectio Emcor: – standard ISO 11007 | 0–0 |
Corrosion protectio Emcor: – water washout test | 0–0* |
EP performance Wear scar DIN 51350/5, 1 400 N, mm | 1,2 max. |
Penetration DIN ISO 2137 100 000 strokes, 10–1 mm | 325 max. |
Oil separatio DIN 51 817, 7 days at 40 °C, static, % | 1–5 |
EP performance 4–ball test, welding load DIN 51350/4, N | 3 000 min. |
Corrosion protectio Emcor:– salt water test (100% seawater) | 0–0* |
Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm | +50 max. |