ase oil viscosity 40 °C, mm²/s | 500 |
ase oil viscosity 100 °C, mm²/s | 32 |
Penetration DIN ISO 2137 60 strokes, 10–1 mm | 265–295 |
Mechanical stability V2F test | ‘M’ |
Operating temperature range | –20 to +120 °C (–5 to +250 °F) |
Dropping point DIN ISO 2176 | >180 °C (>355 °F) |
Copper corrosio DIN 51 811 | 2 max. at 100 °C (210 °F) |
TLSD series 250 ml refill | LGEM 2/SD250 |
TLSD series 125 ml refill | LGEM 2/SD125 |
NLGI consistency class | 2 |
Typical applications | Rolling element bearings running at low speed and very high loads; Jaw crushers; Track laying machines; Lift mast wheels; Building machines such as mechanical rams, crane arms and crane hooks; |
LAGD series 125 ml | LAGD 125/EM2 |
TLSD series 125 ml | TLSD 125/EM2 |
TLSD series 250 ml | TLSD 250/EM2 |
Features & benefits | High oxidation stability; Molybdenum disulphide and graphite provide lubrication even if the oil film breaks down; Rolling element bearings running at low speed and very high loads; Jaw crushers; |
LAGD series 60 ml | LAGD 60/EM2 |
420 ml cartridge | LGEM 2/0.4 |
DIN 51825 code | KPF2K-20 |
ase oil type | Mineral |
180 kg drum | LGEM 2/180 |
Shelf life | 5 years |
Designatio | LGEM 2/(pack size) |
18 kg pail | LGEM 2/18 |
Thickene | Lithium/calcium |
Packsize | Designation |
5 kg ca | LGEM 2/5 |
Colou | Black |
Water resistance DIN 51 807/1, 3 hrs at 90 °C | 1 max. |
Corrosion protectio Emcor: – standard ISO 11007 | 0–0 |
Corrosion protectio Emcor: – water washout test | 0–0 * |
EP performance Wear scar DIN 51350/5, 1 400 N, mm | 1,2 max. |
Lubrication ability R2F, running test B at 120 °C | Pass at 100 °C (210 °F) |
Penetration DIN ISO 2137 100 000 strokes, 10–1 mm | 325 max. |
Oil separatio DIN 51 817, 7 days at 40 °C, static, % | 1–5 |
EP performance 4–ball test, welding load DIN 51350/4, N | 3 400 min. |
Mechanical stability Roll stability, 50 hrs at 80 °C, 10–1 mm | 345 max. |