LGFP2/EML125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils

Brand Name:SKF
Model Number:LGFP2/EML125
Dropping point DIN ISO 2176:>140 °C (>84 °F)
Operating temperature range:–40 to +100 °C (–40 to +212 °F)
ase oil viscosity 40 °C, mm2/s:500
Biodegradability OECD 301B:>60%
100 000 strokes, 10–1 mm:+35 max. (325 max.)
NLGI consistency class:2
Typical applications:Wire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain bearings and bushings;
Oil separatio IP 121:1-3

Product Details

Dropping point DIN ISO 2176>140 °C (>84 °F)
Operating temperature range–40 to +100 °C (–40 to +212 °F)
ase oil viscosity 40 °C, mm2/s500
Biodegradability OECD 301B>60%
100 000 strokes, 10–1 mm+35 max. (325 max.)
NLGI consistency class2
Typical applicationsWire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain bearings and bushings;
Oil separatio IP 1211-3
Features & benefitsBiodegradable and categorized as “Total loss lubricant (TLL)” as defined by Ecolabel; Environmentally acceptable lubricant according to “2013 Vessel General Permit”; Excellent pumpability at low to
DIN 51825 codeKPE2G-40
Pack sizeDesignation
DesignatioLGTE 2/(pack size)
ase oil typeEster
100 °C, mm2/s50
ThickeneAnhydrous calcium
18 kg caLGTE 2/18
ColouYellow
SKF Emcor – water washout test0–1
Copper corrosio DIN 51 811, 100 °C2 max.
iodegradability Ecolabel certificationSE/027/008
4-ball test, welding load DIN 51350/4, N3 200 min.
Penetration DIN ISO 2137 60 strokes, 10–1 mm265–295
Water resistance DIN 51 807/1, 3 hrs at 90 °C1 max.
EP performance Wear scar DIN 51350/5, 1 400 N, mm2 max.
Corrosion protectio SKF Emcor – standard ISO 110070–0
View more

Company Profile

Phone +61-2-9985 9219
View more

Related News

  • The Three Mistakes of Bearing Lubrication - ApplicationsMay 19, 2016 — Too much grease builds pressure, pushing the rolling elements through the fluid film and against the outer race. The bearing now has to work much harder to push the rolling...
  • Can WD40 be Used as a Bearing Lubricant?"I am being asked by others in my company to start using WD40 as a bearing lubricant. I know that this is not best practice, but I need to explain to them why Can You Use WD40 To Clean Skateboard...
  • CV joint grease question - Pelican Parts ForumsDec 19, 2016 — My question is: Can I get any off the shelf CV grease to put in there or do I to for some reason, plain jane wheel bearing grease would be fine Choosing the Right Grease - Machinery...
  • Recommended Products

    All Products Contact Now