You may like Skf Bearing Grease as bellow | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | m | W | D | B | H | t | Z | |
ZR3.20.1250.400-1SPPN | ISB | - | 12 mm | - | 1397 mm | - | 132 mm | - | 87 mm |
ARN65125 | NTN | - | - | - | 125 mm | - | - | - | - |
ZAXFM1255 | INA | 0,05 mm / Axial runout accuracy | 160 g / Weight | 3 mm / Grub screw to DIN 913 | 55 mm / The bearing outer ring is blue anodised | 20 mm | 35 mm | 24 mm | - |
125TAD20 | NACHI | - | - | - | 180 mm | - | - | - | - |
125RIF550 | Timken | - | - | - | 419,1 mm | 50,8 mm | - | - | - |
125RIF551 | Timken | - | - | - | 482,6 mm | 66,67 mm | - | - | - |
125RIJ550 | Timken | - | - | - | 419,1 mm | 50,8 mm | - | - | - |
ZGB 110X125X100 | INA | - | - | - | 125 mm | 100 mm | - | - | - |
ZARN 65125 L TN | NBS | - | - | - | 125 mm | 17,5 mm | - | - | - |
ZARN 65125 TN | NBS | - | - | - | 125 mm | 17,5 mm | 82 mm | - | - |
125RIJ551 | Timken | - | - | - | 482,6 mm | 66,67 mm | - | - | - |
LHHT265/EML12 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Dropping point DIN ISO 2176:>140 °C (>84 °F); Operating temperature range:–40 to +100 °C (–40 to +212 °F); ase oil viscosity 40 °C, mm2/s:500; Biodegradability OECD 301B:>60%; 100 000 strokes, 10–1 mm:+35 max. (325 max.); NLGI consistency class:2; Typical applications:Wire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain; Oil separatio IP 121:1-3; Features & benefits:Biodegradable and categorized as “Total loss lubricant (TLL)” as defined by Ecolabel; Environmentally acceptable; DIN 51825 code:KPE2G-40; Pack size:Designation; Designatio:LGTE 2/(pack size); ase oil type:Ester; 100 °C, mm2/s:50; Thickene:Anhydrous calcium; 18 kg ca:LGTE 2/18; Colou:Yellow; SKF Emcor – water washout test:0–1; Copper corrosio DIN 51 811, 100 °C:2 max.; iodegradability Ecolabel certification:SE/027/008; 4-ball test, welding load DIN 51350/4, N:3 200 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:2 max.; Corrosion protectio SKF Emcor – standard ISO 11007:0–0; |
LAGD125/EM2M.LGEM-2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Dropping point DIN ISO 2176:>140 °C (>84 °F); Operating temperature range:–40 to +100 °C (–40 to +212 °F); ase oil viscosity 40 °C, mm2/s:500; Biodegradability OECD 301B:>60%; 100 000 strokes, 10–1 mm:+35 max. (325 max.); NLGI consistency class:2; Typical applications:Wire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain; Oil separatio IP 121:1-3; Features & benefits:Biodegradable and categorized as “Total loss lubricant (TLL)” as defined by Ecolabel; Environmentally acceptable; DIN 51825 code:KPE2G-40; Pack size:Designation; Designatio:LGTE 2/(pack size); ase oil type:Ester; 100 °C, mm2/s:50; Thickene:Anhydrous calcium; 18 kg ca:LGTE 2/18; Colou:Yellow; SKF Emcor – water washout test:0–1; Copper corrosio DIN 51 811, 100 °C:2 max.; iodegradability Ecolabel certification:SE/027/008; 4-ball test, welding load DIN 51350/4, N:3 200 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:2 max.; Corrosion protectio SKF Emcor – standard ISO 11007:0–0; |
LAGE125/HHT26 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Dropping point DIN ISO 2176:>140 °C (>84 °F); Operating temperature range:–40 to +100 °C (–40 to +212 °F); ase oil viscosity 40 °C, mm2/s:500; Biodegradability OECD 301B:>60%; 100 000 strokes, 10–1 mm:+35 max. (325 max.); NLGI consistency class:2; Typical applications:Wire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain; Oil separatio IP 121:1-3; Features & benefits:Biodegradable and categorized as “Total loss lubricant (TLL)” as defined by Ecolabel; Environmentally acceptable; DIN 51825 code:KPE2G-40; Pack size:Designation; Designatio:LGTE 2/(pack size); ase oil type:Ester; 100 °C, mm2/s:50; Thickene:Anhydrous calcium; 18 kg ca:LGTE 2/18; Colou:Yellow; SKF Emcor – water washout test:0–1; Copper corrosio DIN 51 811, 100 °C:2 max.; iodegradability Ecolabel certification:SE/027/008; 4-ball test, welding load DIN 51350/4, N:3 200 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:2 max.; Corrosion protectio SKF Emcor – standard ISO 11007:0–0; |
LAGD125/FHF15 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Dropping point DIN ISO 2176:>140 °C (>84 °F); Operating temperature range:–40 to +100 °C (–40 to +212 °F); ase oil viscosity 40 °C, mm2/s:500; Biodegradability OECD 301B:>60%; 100 000 strokes, 10–1 mm:+35 max. (325 max.); NLGI consistency class:2; Typical applications:Wire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain; Oil separatio IP 121:1-3; Features & benefits:Biodegradable and categorized as “Total loss lubricant (TLL)” as defined by Ecolabel; Environmentally acceptable; DIN 51825 code:KPE2G-40; Pack size:Designation; Designatio:LGTE 2/(pack size); ase oil type:Ester; 100 °C, mm2/s:50; Thickene:Anhydrous calcium; 18 kg ca:LGTE 2/18; Colou:Yellow; SKF Emcor – water washout test:0–1; Copper corrosio DIN 51 811, 100 °C:2 max.; iodegradability Ecolabel certification:SE/027/008; 4-ball test, welding load DIN 51350/4, N:3 200 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:2 max.; Corrosion protectio SKF Emcor – standard ISO 11007:0–0; |
LHFP150/EML25 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Dropping point DIN ISO 2176:>140 °C (>84 °F); Operating temperature range:–40 to +100 °C (–40 to +212 °F); ase oil viscosity 40 °C, mm2/s:500; Biodegradability OECD 301B:>60%; 100 000 strokes, 10–1 mm:+35 max. (325 max.); NLGI consistency class:2; Typical applications:Wire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain; Oil separatio IP 121:1-3; Features & benefits:Biodegradable and categorized as “Total loss lubricant (TLL)” as defined by Ecolabel; Environmentally acceptable; DIN 51825 code:KPE2G-40; Pack size:Designation; Designatio:LGTE 2/(pack size); ase oil type:Ester; 100 °C, mm2/s:50; Thickene:Anhydrous calcium; 18 kg ca:LGTE 2/18; Colou:Yellow; SKF Emcor – water washout test:0–1; Copper corrosio DIN 51 811, 100 °C:2 max.; iodegradability Ecolabel certification:SE/027/008; 4-ball test, welding load DIN 51350/4, N:3 200 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:2 max.; Corrosion protectio SKF Emcor – standard ISO 11007:0–0; |
LAGD125/HFP15 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Dropping point DIN ISO 2176:>140 °C (>84 °F); Operating temperature range:–40 to +100 °C (–40 to +212 °F); ase oil viscosity 40 °C, mm2/s:500; Biodegradability OECD 301B:>60%; 100 000 strokes, 10–1 mm:+35 max. (325 max.); NLGI consistency class:2; Typical applications:Wire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain; Oil separatio IP 121:1-3; Features & benefits:Biodegradable and categorized as “Total loss lubricant (TLL)” as defined by Ecolabel; Environmentally acceptable; DIN 51825 code:KPE2G-40; Pack size:Designation; Designatio:LGTE 2/(pack size); ase oil type:Ester; 100 °C, mm2/s:50; Thickene:Anhydrous calcium; 18 kg ca:LGTE 2/18; Colou:Yellow; SKF Emcor – water washout test:0–1; Copper corrosio DIN 51 811, 100 °C:2 max.; iodegradability Ecolabel certification:SE/027/008; 4-ball test, welding load DIN 51350/4, N:3 200 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:2 max.; Corrosion protectio SKF Emcor – standard ISO 11007:0–0; |
LAGD125/FG202 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Dropping point DIN ISO 2176:>140 °C (>84 °F); Operating temperature range:–40 to +100 °C (–40 to +212 °F); ase oil viscosity 40 °C, mm2/s:500; Biodegradability OECD 301B:>60%; 100 000 strokes, 10–1 mm:+35 max. (325 max.); NLGI consistency class:2; Typical applications:Wire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain; Oil separatio IP 121:1-3; Features & benefits:Biodegradable and categorized as “Total loss lubricant (TLL)” as defined by Ecolabel; Environmentally acceptable; DIN 51825 code:KPE2G-40; Pack size:Designation; Designatio:LGTE 2/(pack size); ase oil type:Ester; 100 °C, mm2/s:50; Thickene:Anhydrous calcium; 18 kg ca:LGTE 2/18; Colou:Yellow; SKF Emcor – water washout test:0–1; Copper corrosio DIN 51 811, 100 °C:2 max.; iodegradability Ecolabel certification:SE/027/008; 4-ball test, welding load DIN 51350/4, N:3 200 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:2 max.; Corrosion protectio SKF Emcor – standard ISO 11007:0–0; |
LAHD1000-1 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs1 000 min. at 100 °– water washout test0–0ThickeneLithium-CalciumEP performance Wear scar DIN 51350/5, 1 400 N, mm1.8 max.Water resistance DIN 51 807/1, 3 hrs at 90 °C1 max.NLGI consistency class1Penetration DIN ISO 2137 60 strokes, |
LHSP38/0.015 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Dropping point DIN ISO 2176:>140 °C (>84 °F); Operating temperature range:–40 to +100 °C (–40 to +212 °F); ase oil viscosity 40 °C, mm2/s:500; Biodegradability OECD 301B:>60%; 100 000 strokes, 10–1 mm:+35 max. (325 max.); NLGI consistency class:2; Typical applications:Wire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain; Oil separatio IP 121:1-3; Features & benefits:Biodegradable and categorized as “Total loss lubricant (TLL)” as defined by Ecolabel; Environmentally acceptable; DIN 51825 code:KPE2G-40; Pack size:Designation; Designatio:LGTE 2/(pack size); ase oil type:Ester; 100 °C, mm2/s:50; Thickene:Anhydrous calcium; 18 kg ca:LGTE 2/18; Colou:Yellow; SKF Emcor – water washout test:0–1; Copper corrosio DIN 51 811, 100 °C:2 max.; iodegradability Ecolabel certification:SE/027/008; 4-ball test, welding load DIN 51350/4, N:3 200 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:2 max.; Corrosion protectio SKF Emcor – standard ISO 11007:0–0; |
LAGE125/HP2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Dropping point DIN ISO 2176:>140 °C (>84 °F); Operating temperature range:–40 to +100 °C (–40 to +212 °F); ase oil viscosity 40 °C, mm2/s:500; Biodegradability OECD 301B:>60%; 100 000 strokes, 10–1 mm:+35 max. (325 max.); NLGI consistency class:2; Typical applications:Wire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain; Oil separatio IP 121:1-3; Features & benefits:Biodegradable and categorized as “Total loss lubricant (TLL)” as defined by Ecolabel; Environmentally acceptable; DIN 51825 code:KPE2G-40; Pack size:Designation; Designatio:LGTE 2/(pack size); ase oil type:Ester; 100 °C, mm2/s:50; Thickene:Anhydrous calcium; 18 kg ca:LGTE 2/18; Colou:Yellow; SKF Emcor – water washout test:0–1; Copper corrosio DIN 51 811, 100 °C:2 max.; iodegradability Ecolabel certification:SE/027/008; 4-ball test, welding load DIN 51350/4, N:3 200 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:2 max.; Corrosion protectio SKF Emcor – standard ISO 11007:0–0; |
LGEV2/0.035 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Dropping point DIN ISO 2176:>140 °C (>84 °F); Operating temperature range:–40 to +100 °C (–40 to +212 °F); ase oil viscosity 40 °C, mm2/s:500; Biodegradability OECD 301B:>60%; 100 000 strokes, 10–1 mm:+35 max. (325 max.); NLGI consistency class:2; Typical applications:Wire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain; Oil separatio IP 121:1-3; Features & benefits:Biodegradable and categorized as “Total loss lubricant (TLL)” as defined by Ecolabel; Environmentally acceptable; DIN 51825 code:KPE2G-40; Pack size:Designation; Designatio:LGTE 2/(pack size); ase oil type:Ester; 100 °C, mm2/s:50; Thickene:Anhydrous calcium; 18 kg ca:LGTE 2/18; Colou:Yellow; SKF Emcor – water washout test:0–1; Copper corrosio DIN 51 811, 100 °C:2 max.; iodegradability Ecolabel certification:SE/027/008; 4-ball test, welding load DIN 51350/4, N:3 200 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:2 max.; Corrosion protectio SKF Emcor – standard ISO 11007:0–0; |
LGHP2/SD125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Dropping point DIN ISO 2176:>140 °C (>84 °F); Operating temperature range:–40 to +100 °C (–40 to +212 °F); ase oil viscosity 40 °C, mm2/s:500; Biodegradability OECD 301B:>60%; 100 000 strokes, 10–1 mm:+35 max. (325 max.); NLGI consistency class:2; Typical applications:Wire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain; Oil separatio IP 121:1-3; Features & benefits:Biodegradable and categorized as “Total loss lubricant (TLL)” as defined by Ecolabel; Environmentally acceptable; DIN 51825 code:KPE2G-40; Pack size:Designation; Designatio:LGTE 2/(pack size); ase oil type:Ester; 100 °C, mm2/s:50; Thickene:Anhydrous calcium; 18 kg ca:LGTE 2/18; Colou:Yellow; SKF Emcor – water washout test:0–1; Copper corrosio DIN 51 811, 100 °C:2 max.; iodegradability Ecolabel certification:SE/027/008; 4-ball test, welding load DIN 51350/4, N:3 200 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:2 max.; Corrosion protectio SKF Emcor – standard ISO 11007:0–0; |
LGHB2/EML125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Dropping point DIN ISO 2176:>140 °C (>84 °F); Operating temperature range:–40 to +100 °C (–40 to +212 °F); ase oil viscosity 40 °C, mm2/s:500; Biodegradability OECD 301B:>60%; 100 000 strokes, 10–1 mm:+35 max. (325 max.); NLGI consistency class:2; Typical applications:Wire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain; Oil separatio IP 121:1-3; Features & benefits:Biodegradable and categorized as “Total loss lubricant (TLL)” as defined by Ecolabel; Environmentally acceptable; DIN 51825 code:KPE2G-40; Pack size:Designation; Designatio:LGTE 2/(pack size); ase oil type:Ester; 100 °C, mm2/s:50; Thickene:Anhydrous calcium; 18 kg ca:LGTE 2/18; Colou:Yellow; SKF Emcor – water washout test:0–1; Copper corrosio DIN 51 811, 100 °C:2 max.; iodegradability Ecolabel certification:SE/027/008; 4-ball test, welding load DIN 51350/4, N:3 200 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:2 max.; Corrosion protectio SKF Emcor – standard ISO 11007:0–0; |
TLSD250/HB2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Dropping point DIN ISO 2176:>140 °C (>84 °F); Operating temperature range:–40 to +100 °C (–40 to +212 °F); ase oil viscosity 40 °C, mm2/s:500; Biodegradability OECD 301B:>60%; 100 000 strokes, 10–1 mm:+35 max. (325 max.); NLGI consistency class:2; Typical applications:Wire ropes; Marine; Construction equipment; Forestry and agricultural equipment; Heavy duty off-road application; Plain; Oil separatio IP 121:1-3; Features & benefits:Biodegradable and categorized as “Total loss lubricant (TLL)” as defined by Ecolabel; Environmentally acceptable; DIN 51825 code:KPE2G-40; Pack size:Designation; Designatio:LGTE 2/(pack size); ase oil type:Ester; 100 °C, mm2/s:50; Thickene:Anhydrous calcium; 18 kg ca:LGTE 2/18; Colou:Yellow; SKF Emcor – water washout test:0–1; Copper corrosio DIN 51 811, 100 °C:2 max.; iodegradability Ecolabel certification:SE/027/008; 4-ball test, welding load DIN 51350/4, N:3 200 min.; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; EP performance Wear scar DIN 51350/5, 1 400 N, mm:2 max.; Corrosion protectio SKF Emcor – standard ISO 11007:0–0; |
LGFP2/EML125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils Video