Lubrication ability R2F, running test B at 120 °C | Pass at 140 °C (285 °F) |
EP performance Wear scar DIN 51350/5, 1 400 N, mm | 1,5 max. * |
Corrosion protectio Emcor: – water washout test | 0–0 |
Corrosion protectio Emcor: – standard ISO 11007 | 0–0 |
Water resistance DIN 51 807/1, 3 hrs at 90 °C | 1 max. |
ase oil viscosity 100 °C, mm²/s | 8,6 |
TLMR 101 series 380 ml refill (incl. battery) | LGWM 2/MR 380B |
Penetration DIN ISO 2137 60 strokes, 10–1 mm | 280–310 |
ase oil viscosity 40 °C, mm²/s | 80 |
TLMR 201 series 380 ml refill | LGWM 2/MR380 |
Operating temperature range | –40 to +110 °C (–40 to +230 °F) |
Dropping point DIN ISO 2176 | >300 °C (>570 °F) |
Copper corrosio DIN 51 811 | 2 max. at 100 °C (210 °F) |
NLGI consistency class | 1–2 |
Typical applications | Wind turbine mains shafts; Heavy duty off road applications; Snow exposed applications; Marine and offshore applications; Spherical roller thrust bearing applications; |
Features & benefits | Excellent corrosion protection; Excellent mechanical stability; Excellent high load lubricating capacity; Good false brinelling protection; Good pumpability down to low temperatures; Wind turbine |
LAGD series 125 ml | LAGD 125/WM2 |
420 ml cartridge | LGWM 2/0.4 |
DIN 51825 code | KP2G-40 |
ase oil type | Synthetic (PAO)/ Mineral |
180 kg drum | LGWM 2/180 |
Shelf life | 5 years |
Designatio | LGWM 2/(pack size) |
50 kg drum | LGWM 2/50 |
18 kg pail | LGWM 2/18 |
Thickene | Calcium sulphonate complex |
Packsize | Designation |
5 kg ca | LGWM 2/5 |
Colou | Yellow |
Penetration DIN ISO 2137 100 000 strokes, 10–1 mm | +30 max |
Oil separatio DIN 51 817, 7 days at 40 °C, static, % | 3 max. |
Fretting corrosio ASTM D4170 FAFNIR test at +25 °C, mg | 5,2* |
EP performance 4–ball test, welding load DIN 51350/4, N | 4 000 min * |
Fretting corrosio ASTM D4170 FAFNIR test at –20 °C, mg | 1,1* |
Mechanical stability Roll stability, 50h at 80 °C, 10–1 mm | +50 max. |
Corrosion protectio Emcor: – salt water test (100% seawater) | 0–0 * |
Lubrication ability R2F, Cold chamber test (+20 °C to –30 °C) | Pass |
Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs | 1 824* at 110 °C |