You may like Skf Bearing Grease as bellow | |||||||||
---|---|---|---|---|---|---|---|---|---|
No. | Brand | N | B | V | Z | t | r | C | D |
110FSH180 | Timken | - | - | - | - | - | - | 70 mm | 180 mm |
115FSF180 | NSK | - | 98 mm | - | - | - | - | 815 kN | 180 mm |
120FS180 | Timken | - | - | - | - | - | - | 70 mm | 180 mm |
120FSF180 | NSK | - | 85 mm | - | - | - | - | 745 kN | 180 mm |
100RNPH1801 | NSK | - | - | - | - | - | - | 475 kN | 185 mm |
180TMP93 | NSK | - | - | - | - | 20.5 | 3 | 1000 | 300 mm |
180TMP94 | NSK | - | - | - | - | 32 | 5 | 1640 | 360 mm |
180TP168 | Timken | - | - | - | - | - | - | - | 660,4 mm |
180TP169 | Timken | - | - | - | - | - | - | - | 711,2 mm |
180TP170 | Timken | - | - | - | - | - | - | - | 762 mm |
ZR3.20.1800.400-1SPPN | ISB | 46 mm | - | 26 mm | 98 mm | - | - | - | 1947 mm |
LAGD125/FG202 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Corrosion protectio Emcor: – standard ISO 11007:0–0; TLMR 101 series 380 ml refill (incl. battery):LGHB 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:26,5; Fretting corrosio ASTM D4170 (mg):0*; Mechanical stability V2F test:‘M’; TLMR 201 series 380 ml refill:LGHB 2/MR380; ase oil viscosity 40 °C, mm²/s:400–450; Operating temperature range:–20 to +150 °C (–5 to +300 °F); Dropping point DIN ISO 2176:>220 °C (>430 °F); Copper corrosio DIN 51 811:2 max. 150 °C (300 °F); TLSD series 250 ml refill:LGHB 2/SD250; NLGI consistency class:2; TLSD series 125 ml refill:LGHB 2/SD125; Typical applications:Steel on steel plain bearings; Pulp and paper making machines; Asphalt vibrating screens; Continuous casting machines;; Features & benefits:Excellent load capacity, anti-oxidation and corrosion protection even with large water ingress; Withstands peak; TLSD series 250 ml:TLSD 250/HB2; TLSD series 125 ml:TLSD 125/HB2; LAGD series 125 ml:LAGD 125/HB2; LAGD series 60 ml:LAGD 60/HB2; 420 ml cartridge:LGHB 2/0.4; DIN 51825 code:KP2N-20; ase oil type:Mineral; 180 kg drum:LGHB 2/180; Shelf life:5 years; Designatio:LGHB 2/(pack size); 50 kg drum:LGHB 2/50; 18 kg pail:LGHB 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; Colou:Brown; 5 kg ca:LGHB 2/5; Corrosion protectio Emcor: – water washout test:0–0; EP performance Wear scar DIN 51350/5, 1 400 N, mm:0,86*; Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:–20 to +50 (325 max.); Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–3 at 60 °C (140 °F); EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:–20 to +50 change; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:>1 000 at 130 °C (265 °F); |
LAHD1000-1 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs1 000 min. at 100 °– water washout test0–0ThickeneLithium-CalciumEP performance Wear scar DIN 51350/5, 1 400 N, mm1.8 max.Water resistance DIN 51 807/1, 3 hrs at 90 °C1 max.NLGI consistency class1Penetration DIN ISO 2137 60 strokes, |
LAGD125/HFP15 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Corrosion protectio Emcor: – standard ISO 11007:0–0; TLMR 101 series 380 ml refill (incl. battery):LGHB 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:26,5; Fretting corrosio ASTM D4170 (mg):0*; Mechanical stability V2F test:‘M’; TLMR 201 series 380 ml refill:LGHB 2/MR380; ase oil viscosity 40 °C, mm²/s:400–450; Operating temperature range:–20 to +150 °C (–5 to +300 °F); Dropping point DIN ISO 2176:>220 °C (>430 °F); Copper corrosio DIN 51 811:2 max. 150 °C (300 °F); TLSD series 250 ml refill:LGHB 2/SD250; NLGI consistency class:2; TLSD series 125 ml refill:LGHB 2/SD125; Typical applications:Steel on steel plain bearings; Pulp and paper making machines; Asphalt vibrating screens; Continuous casting machines;; Features & benefits:Excellent load capacity, anti-oxidation and corrosion protection even with large water ingress; Withstands peak; TLSD series 250 ml:TLSD 250/HB2; TLSD series 125 ml:TLSD 125/HB2; LAGD series 125 ml:LAGD 125/HB2; LAGD series 60 ml:LAGD 60/HB2; 420 ml cartridge:LGHB 2/0.4; DIN 51825 code:KP2N-20; ase oil type:Mineral; 180 kg drum:LGHB 2/180; Shelf life:5 years; Designatio:LGHB 2/(pack size); 50 kg drum:LGHB 2/50; 18 kg pail:LGHB 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; Colou:Brown; 5 kg ca:LGHB 2/5; Corrosion protectio Emcor: – water washout test:0–0; EP performance Wear scar DIN 51350/5, 1 400 N, mm:0,86*; Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:–20 to +50 (325 max.); Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–3 at 60 °C (140 °F); EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:–20 to +50 change; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:>1 000 at 130 °C (265 °F); |
TLSD250/HB2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Corrosion protectio Emcor: – standard ISO 11007:0–0; TLMR 101 series 380 ml refill (incl. battery):LGHB 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:26,5; Fretting corrosio ASTM D4170 (mg):0*; Mechanical stability V2F test:‘M’; TLMR 201 series 380 ml refill:LGHB 2/MR380; ase oil viscosity 40 °C, mm²/s:400–450; Operating temperature range:–20 to +150 °C (–5 to +300 °F); Dropping point DIN ISO 2176:>220 °C (>430 °F); Copper corrosio DIN 51 811:2 max. 150 °C (300 °F); TLSD series 250 ml refill:LGHB 2/SD250; NLGI consistency class:2; TLSD series 125 ml refill:LGHB 2/SD125; Typical applications:Steel on steel plain bearings; Pulp and paper making machines; Asphalt vibrating screens; Continuous casting machines;; Features & benefits:Excellent load capacity, anti-oxidation and corrosion protection even with large water ingress; Withstands peak; TLSD series 250 ml:TLSD 250/HB2; TLSD series 125 ml:TLSD 125/HB2; LAGD series 125 ml:LAGD 125/HB2; LAGD series 60 ml:LAGD 60/HB2; 420 ml cartridge:LGHB 2/0.4; DIN 51825 code:KP2N-20; ase oil type:Mineral; 180 kg drum:LGHB 2/180; Shelf life:5 years; Designatio:LGHB 2/(pack size); 50 kg drum:LGHB 2/50; 18 kg pail:LGHB 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; Colou:Brown; 5 kg ca:LGHB 2/5; Corrosion protectio Emcor: – water washout test:0–0; EP performance Wear scar DIN 51350/5, 1 400 N, mm:0,86*; Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:–20 to +50 (325 max.); Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–3 at 60 °C (140 °F); EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:–20 to +50 change; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:>1 000 at 130 °C (265 °F); |
LAGD125/FHF15 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Corrosion protectio Emcor: – standard ISO 11007:0–0; TLMR 101 series 380 ml refill (incl. battery):LGHB 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:26,5; Fretting corrosio ASTM D4170 (mg):0*; Mechanical stability V2F test:‘M’; TLMR 201 series 380 ml refill:LGHB 2/MR380; ase oil viscosity 40 °C, mm²/s:400–450; Operating temperature range:–20 to +150 °C (–5 to +300 °F); Dropping point DIN ISO 2176:>220 °C (>430 °F); Copper corrosio DIN 51 811:2 max. 150 °C (300 °F); TLSD series 250 ml refill:LGHB 2/SD250; NLGI consistency class:2; TLSD series 125 ml refill:LGHB 2/SD125; Typical applications:Steel on steel plain bearings; Pulp and paper making machines; Asphalt vibrating screens; Continuous casting machines;; Features & benefits:Excellent load capacity, anti-oxidation and corrosion protection even with large water ingress; Withstands peak; TLSD series 250 ml:TLSD 250/HB2; TLSD series 125 ml:TLSD 125/HB2; LAGD series 125 ml:LAGD 125/HB2; LAGD series 60 ml:LAGD 60/HB2; 420 ml cartridge:LGHB 2/0.4; DIN 51825 code:KP2N-20; ase oil type:Mineral; 180 kg drum:LGHB 2/180; Shelf life:5 years; Designatio:LGHB 2/(pack size); 50 kg drum:LGHB 2/50; 18 kg pail:LGHB 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; Colou:Brown; 5 kg ca:LGHB 2/5; Corrosion protectio Emcor: – water washout test:0–0; EP performance Wear scar DIN 51350/5, 1 400 N, mm:0,86*; Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:–20 to +50 (325 max.); Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–3 at 60 °C (140 °F); EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:–20 to +50 change; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:>1 000 at 130 °C (265 °F); |
LGHP2/SD125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Corrosion protectio Emcor: – standard ISO 11007:0–0; TLMR 101 series 380 ml refill (incl. battery):LGHB 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:26,5; Fretting corrosio ASTM D4170 (mg):0*; Mechanical stability V2F test:‘M’; TLMR 201 series 380 ml refill:LGHB 2/MR380; ase oil viscosity 40 °C, mm²/s:400–450; Operating temperature range:–20 to +150 °C (–5 to +300 °F); Dropping point DIN ISO 2176:>220 °C (>430 °F); Copper corrosio DIN 51 811:2 max. 150 °C (300 °F); TLSD series 250 ml refill:LGHB 2/SD250; NLGI consistency class:2; TLSD series 125 ml refill:LGHB 2/SD125; Typical applications:Steel on steel plain bearings; Pulp and paper making machines; Asphalt vibrating screens; Continuous casting machines;; Features & benefits:Excellent load capacity, anti-oxidation and corrosion protection even with large water ingress; Withstands peak; TLSD series 250 ml:TLSD 250/HB2; TLSD series 125 ml:TLSD 125/HB2; LAGD series 125 ml:LAGD 125/HB2; LAGD series 60 ml:LAGD 60/HB2; 420 ml cartridge:LGHB 2/0.4; DIN 51825 code:KP2N-20; ase oil type:Mineral; 180 kg drum:LGHB 2/180; Shelf life:5 years; Designatio:LGHB 2/(pack size); 50 kg drum:LGHB 2/50; 18 kg pail:LGHB 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; Colou:Brown; 5 kg ca:LGHB 2/5; Corrosion protectio Emcor: – water washout test:0–0; EP performance Wear scar DIN 51350/5, 1 400 N, mm:0,86*; Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:–20 to +50 (325 max.); Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–3 at 60 °C (140 °F); EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:–20 to +50 change; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:>1 000 at 130 °C (265 °F); |
LAGD125/EM2M.LGEM-2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Corrosion protectio Emcor: – standard ISO 11007:0–0; TLMR 101 series 380 ml refill (incl. battery):LGHB 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:26,5; Fretting corrosio ASTM D4170 (mg):0*; Mechanical stability V2F test:‘M’; TLMR 201 series 380 ml refill:LGHB 2/MR380; ase oil viscosity 40 °C, mm²/s:400–450; Operating temperature range:–20 to +150 °C (–5 to +300 °F); Dropping point DIN ISO 2176:>220 °C (>430 °F); Copper corrosio DIN 51 811:2 max. 150 °C (300 °F); TLSD series 250 ml refill:LGHB 2/SD250; NLGI consistency class:2; TLSD series 125 ml refill:LGHB 2/SD125; Typical applications:Steel on steel plain bearings; Pulp and paper making machines; Asphalt vibrating screens; Continuous casting machines;; Features & benefits:Excellent load capacity, anti-oxidation and corrosion protection even with large water ingress; Withstands peak; TLSD series 250 ml:TLSD 250/HB2; TLSD series 125 ml:TLSD 125/HB2; LAGD series 125 ml:LAGD 125/HB2; LAGD series 60 ml:LAGD 60/HB2; 420 ml cartridge:LGHB 2/0.4; DIN 51825 code:KP2N-20; ase oil type:Mineral; 180 kg drum:LGHB 2/180; Shelf life:5 years; Designatio:LGHB 2/(pack size); 50 kg drum:LGHB 2/50; 18 kg pail:LGHB 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; Colou:Brown; 5 kg ca:LGHB 2/5; Corrosion protectio Emcor: – water washout test:0–0; EP performance Wear scar DIN 51350/5, 1 400 N, mm:0,86*; Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:–20 to +50 (325 max.); Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–3 at 60 °C (140 °F); EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:–20 to +50 change; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:>1 000 at 130 °C (265 °F); |
LHSP38/0.015 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Corrosion protectio Emcor: – standard ISO 11007:0–0; TLMR 101 series 380 ml refill (incl. battery):LGHB 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:26,5; Fretting corrosio ASTM D4170 (mg):0*; Mechanical stability V2F test:‘M’; TLMR 201 series 380 ml refill:LGHB 2/MR380; ase oil viscosity 40 °C, mm²/s:400–450; Operating temperature range:–20 to +150 °C (–5 to +300 °F); Dropping point DIN ISO 2176:>220 °C (>430 °F); Copper corrosio DIN 51 811:2 max. 150 °C (300 °F); TLSD series 250 ml refill:LGHB 2/SD250; NLGI consistency class:2; TLSD series 125 ml refill:LGHB 2/SD125; Typical applications:Steel on steel plain bearings; Pulp and paper making machines; Asphalt vibrating screens; Continuous casting machines;; Features & benefits:Excellent load capacity, anti-oxidation and corrosion protection even with large water ingress; Withstands peak; TLSD series 250 ml:TLSD 250/HB2; TLSD series 125 ml:TLSD 125/HB2; LAGD series 125 ml:LAGD 125/HB2; LAGD series 60 ml:LAGD 60/HB2; 420 ml cartridge:LGHB 2/0.4; DIN 51825 code:KP2N-20; ase oil type:Mineral; 180 kg drum:LGHB 2/180; Shelf life:5 years; Designatio:LGHB 2/(pack size); 50 kg drum:LGHB 2/50; 18 kg pail:LGHB 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; Colou:Brown; 5 kg ca:LGHB 2/5; Corrosion protectio Emcor: – water washout test:0–0; EP performance Wear scar DIN 51350/5, 1 400 N, mm:0,86*; Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:–20 to +50 (325 max.); Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–3 at 60 °C (140 °F); EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:–20 to +50 change; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:>1 000 at 130 °C (265 °F); |
LHFP150/EML25 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Corrosion protectio Emcor: – standard ISO 11007:0–0; TLMR 101 series 380 ml refill (incl. battery):LGHB 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:26,5; Fretting corrosio ASTM D4170 (mg):0*; Mechanical stability V2F test:‘M’; TLMR 201 series 380 ml refill:LGHB 2/MR380; ase oil viscosity 40 °C, mm²/s:400–450; Operating temperature range:–20 to +150 °C (–5 to +300 °F); Dropping point DIN ISO 2176:>220 °C (>430 °F); Copper corrosio DIN 51 811:2 max. 150 °C (300 °F); TLSD series 250 ml refill:LGHB 2/SD250; NLGI consistency class:2; TLSD series 125 ml refill:LGHB 2/SD125; Typical applications:Steel on steel plain bearings; Pulp and paper making machines; Asphalt vibrating screens; Continuous casting machines;; Features & benefits:Excellent load capacity, anti-oxidation and corrosion protection even with large water ingress; Withstands peak; TLSD series 250 ml:TLSD 250/HB2; TLSD series 125 ml:TLSD 125/HB2; LAGD series 125 ml:LAGD 125/HB2; LAGD series 60 ml:LAGD 60/HB2; 420 ml cartridge:LGHB 2/0.4; DIN 51825 code:KP2N-20; ase oil type:Mineral; 180 kg drum:LGHB 2/180; Shelf life:5 years; Designatio:LGHB 2/(pack size); 50 kg drum:LGHB 2/50; 18 kg pail:LGHB 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; Colou:Brown; 5 kg ca:LGHB 2/5; Corrosion protectio Emcor: – water washout test:0–0; EP performance Wear scar DIN 51350/5, 1 400 N, mm:0,86*; Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:–20 to +50 (325 max.); Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–3 at 60 °C (140 °F); EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:–20 to +50 change; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:>1 000 at 130 °C (265 °F); |
LAGE125/HHT26 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Corrosion protectio Emcor: – standard ISO 11007:0–0; TLMR 101 series 380 ml refill (incl. battery):LGHB 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:26,5; Fretting corrosio ASTM D4170 (mg):0*; Mechanical stability V2F test:‘M’; TLMR 201 series 380 ml refill:LGHB 2/MR380; ase oil viscosity 40 °C, mm²/s:400–450; Operating temperature range:–20 to +150 °C (–5 to +300 °F); Dropping point DIN ISO 2176:>220 °C (>430 °F); Copper corrosio DIN 51 811:2 max. 150 °C (300 °F); TLSD series 250 ml refill:LGHB 2/SD250; NLGI consistency class:2; TLSD series 125 ml refill:LGHB 2/SD125; Typical applications:Steel on steel plain bearings; Pulp and paper making machines; Asphalt vibrating screens; Continuous casting machines;; Features & benefits:Excellent load capacity, anti-oxidation and corrosion protection even with large water ingress; Withstands peak; TLSD series 250 ml:TLSD 250/HB2; TLSD series 125 ml:TLSD 125/HB2; LAGD series 125 ml:LAGD 125/HB2; LAGD series 60 ml:LAGD 60/HB2; 420 ml cartridge:LGHB 2/0.4; DIN 51825 code:KP2N-20; ase oil type:Mineral; 180 kg drum:LGHB 2/180; Shelf life:5 years; Designatio:LGHB 2/(pack size); 50 kg drum:LGHB 2/50; 18 kg pail:LGHB 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; Colou:Brown; 5 kg ca:LGHB 2/5; Corrosion protectio Emcor: – water washout test:0–0; EP performance Wear scar DIN 51350/5, 1 400 N, mm:0,86*; Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:–20 to +50 (325 max.); Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–3 at 60 °C (140 °F); EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:–20 to +50 change; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:>1 000 at 130 °C (265 °F); |
LHHT265/EML12 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Corrosion protectio Emcor: – standard ISO 11007:0–0; TLMR 101 series 380 ml refill (incl. battery):LGHB 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:26,5; Fretting corrosio ASTM D4170 (mg):0*; Mechanical stability V2F test:‘M’; TLMR 201 series 380 ml refill:LGHB 2/MR380; ase oil viscosity 40 °C, mm²/s:400–450; Operating temperature range:–20 to +150 °C (–5 to +300 °F); Dropping point DIN ISO 2176:>220 °C (>430 °F); Copper corrosio DIN 51 811:2 max. 150 °C (300 °F); TLSD series 250 ml refill:LGHB 2/SD250; NLGI consistency class:2; TLSD series 125 ml refill:LGHB 2/SD125; Typical applications:Steel on steel plain bearings; Pulp and paper making machines; Asphalt vibrating screens; Continuous casting machines;; Features & benefits:Excellent load capacity, anti-oxidation and corrosion protection even with large water ingress; Withstands peak; TLSD series 250 ml:TLSD 250/HB2; TLSD series 125 ml:TLSD 125/HB2; LAGD series 125 ml:LAGD 125/HB2; LAGD series 60 ml:LAGD 60/HB2; 420 ml cartridge:LGHB 2/0.4; DIN 51825 code:KP2N-20; ase oil type:Mineral; 180 kg drum:LGHB 2/180; Shelf life:5 years; Designatio:LGHB 2/(pack size); 50 kg drum:LGHB 2/50; 18 kg pail:LGHB 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; Colou:Brown; 5 kg ca:LGHB 2/5; Corrosion protectio Emcor: – water washout test:0–0; EP performance Wear scar DIN 51350/5, 1 400 N, mm:0,86*; Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:–20 to +50 (325 max.); Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–3 at 60 °C (140 °F); EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:–20 to +50 change; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:>1 000 at 130 °C (265 °F); |
LGHB2/EML125 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Corrosion protectio Emcor: – standard ISO 11007:0–0; TLMR 101 series 380 ml refill (incl. battery):LGHB 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:26,5; Fretting corrosio ASTM D4170 (mg):0*; Mechanical stability V2F test:‘M’; TLMR 201 series 380 ml refill:LGHB 2/MR380; ase oil viscosity 40 °C, mm²/s:400–450; Operating temperature range:–20 to +150 °C (–5 to +300 °F); Dropping point DIN ISO 2176:>220 °C (>430 °F); Copper corrosio DIN 51 811:2 max. 150 °C (300 °F); TLSD series 250 ml refill:LGHB 2/SD250; NLGI consistency class:2; TLSD series 125 ml refill:LGHB 2/SD125; Typical applications:Steel on steel plain bearings; Pulp and paper making machines; Asphalt vibrating screens; Continuous casting machines;; Features & benefits:Excellent load capacity, anti-oxidation and corrosion protection even with large water ingress; Withstands peak; TLSD series 250 ml:TLSD 250/HB2; TLSD series 125 ml:TLSD 125/HB2; LAGD series 125 ml:LAGD 125/HB2; LAGD series 60 ml:LAGD 60/HB2; 420 ml cartridge:LGHB 2/0.4; DIN 51825 code:KP2N-20; ase oil type:Mineral; 180 kg drum:LGHB 2/180; Shelf life:5 years; Designatio:LGHB 2/(pack size); 50 kg drum:LGHB 2/50; 18 kg pail:LGHB 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; Colou:Brown; 5 kg ca:LGHB 2/5; Corrosion protectio Emcor: – water washout test:0–0; EP performance Wear scar DIN 51350/5, 1 400 N, mm:0,86*; Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:–20 to +50 (325 max.); Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–3 at 60 °C (140 °F); EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:–20 to +50 change; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:>1 000 at 130 °C (265 °F); |
LGEV2/0.035 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Corrosion protectio Emcor: – standard ISO 11007:0–0; TLMR 101 series 380 ml refill (incl. battery):LGHB 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:26,5; Fretting corrosio ASTM D4170 (mg):0*; Mechanical stability V2F test:‘M’; TLMR 201 series 380 ml refill:LGHB 2/MR380; ase oil viscosity 40 °C, mm²/s:400–450; Operating temperature range:–20 to +150 °C (–5 to +300 °F); Dropping point DIN ISO 2176:>220 °C (>430 °F); Copper corrosio DIN 51 811:2 max. 150 °C (300 °F); TLSD series 250 ml refill:LGHB 2/SD250; NLGI consistency class:2; TLSD series 125 ml refill:LGHB 2/SD125; Typical applications:Steel on steel plain bearings; Pulp and paper making machines; Asphalt vibrating screens; Continuous casting machines;; Features & benefits:Excellent load capacity, anti-oxidation and corrosion protection even with large water ingress; Withstands peak; TLSD series 250 ml:TLSD 250/HB2; TLSD series 125 ml:TLSD 125/HB2; LAGD series 125 ml:LAGD 125/HB2; LAGD series 60 ml:LAGD 60/HB2; 420 ml cartridge:LGHB 2/0.4; DIN 51825 code:KP2N-20; ase oil type:Mineral; 180 kg drum:LGHB 2/180; Shelf life:5 years; Designatio:LGHB 2/(pack size); 50 kg drum:LGHB 2/50; 18 kg pail:LGHB 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; Colou:Brown; 5 kg ca:LGHB 2/5; Corrosion protectio Emcor: – water washout test:0–0; EP performance Wear scar DIN 51350/5, 1 400 N, mm:0,86*; Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:–20 to +50 (325 max.); Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–3 at 60 °C (140 °F); EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:–20 to +50 change; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:>1 000 at 130 °C (265 °F); |
LAGE125/HP2 SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils | Corrosion protectio Emcor: – standard ISO 11007:0–0; TLMR 101 series 380 ml refill (incl. battery):LGHB 2/MR 380B; Penetration DIN ISO 2137 60 strokes, 10–1 mm:265–295; Water resistance DIN 51 807/1, 3 hrs at 90 °C:1 max.; ase oil viscosity 100 °C, mm²/s:26,5; Fretting corrosio ASTM D4170 (mg):0*; Mechanical stability V2F test:‘M’; TLMR 201 series 380 ml refill:LGHB 2/MR380; ase oil viscosity 40 °C, mm²/s:400–450; Operating temperature range:–20 to +150 °C (–5 to +300 °F); Dropping point DIN ISO 2176:>220 °C (>430 °F); Copper corrosio DIN 51 811:2 max. 150 °C (300 °F); TLSD series 250 ml refill:LGHB 2/SD250; NLGI consistency class:2; TLSD series 125 ml refill:LGHB 2/SD125; Typical applications:Steel on steel plain bearings; Pulp and paper making machines; Asphalt vibrating screens; Continuous casting machines;; Features & benefits:Excellent load capacity, anti-oxidation and corrosion protection even with large water ingress; Withstands peak; TLSD series 250 ml:TLSD 250/HB2; TLSD series 125 ml:TLSD 125/HB2; LAGD series 125 ml:LAGD 125/HB2; LAGD series 60 ml:LAGD 60/HB2; 420 ml cartridge:LGHB 2/0.4; DIN 51825 code:KP2N-20; ase oil type:Mineral; 180 kg drum:LGHB 2/180; Shelf life:5 years; Designatio:LGHB 2/(pack size); 50 kg drum:LGHB 2/50; 18 kg pail:LGHB 2/18; Thickene:Calcium sulphonate complex; Packsize:Designation; Colou:Brown; 5 kg ca:LGHB 2/5; Corrosion protectio Emcor: – water washout test:0–0; EP performance Wear scar DIN 51350/5, 1 400 N, mm:0,86*; Lubrication ability R2F, running test B at 120 °C:Pass at 140 °C (285 °F); Penetration DIN ISO 2137 100 000 strokes, 10–1 mm:–20 to +50 (325 max.); Oil separatio DIN 51 817, 7 days at 40 °C, static, %:1–3 at 60 °C (140 °F); EP performance 4–ball test, welding load DIN 51350/4, N:4 000 min.; Corrosion protectio Emcor: – salt water test (100% seawater):0–0*; Mechanical stability Roll stability, 72 hrs at 100 °C, 10–1 mm:–20 to +50 change; Rolling bearing grease life R0F test L50 life at 10 000 r/min., hrs:>1 000 at 130 °C (265 °F); |
GRA-AT3/180K SKF Bearings,Grease and Lubrication,Grease, Lubrications and Oils Video